ATI Powermodule Hybrid Club

[pommie]

I have an old 8 x T5 Hybrid with three LED clusters and the LEDs are flickering like crazy. I understand this is a design flaw and there is no warranty but is there any way to turn the LEDS of completely and just run the T5 bulbs?

I will take it apart and cut wires if somebody can instruct me.

Thanks

 

[theshaman]

I have an old 8 x T5 Hybrid with three LED clusters and the LEDs are flickering like crazy. I understand this is a design flaw and there is no warranty but is there any way to turn the LEDS of completely and just run the T5 bulbs?



I will take it apart and cut wires if somebody can instruct me.



Thanks

Hook it up your PC, open up light studio and set all the led set points to off.


Sent from my iPhone using Tapatalk

 

[Keith@ ATI NA]

I have an old 8 x T5 Hybrid with three LED clusters and the LEDs are flickering like crazy. I understand this is a design flaw and there is no warranty but is there any way to turn the LEDS of completely and just run the T5 bulbs?

I will take it apart and cut wires if somebody can instruct me.

Thanks

I don't know what design flaw you speak of, but its likely a problem with your control box. If the temperature shown doesn't make sense its likely not communicating properly with the light.

To disable them, I would recommend either removing the LED Cluster, or the KSQ. You can find videos on both of these items on our ATI North America YouTube channel.

 

[Joe0813]

looking at a 60 inch 8 bulb for our 72 inch tank... how do you guys like these? seems like I cant make up my mind on which direction to go for new lighting. Im coming from three radion gen twos. So far I have looked into radion gen 4 pros, keep the gen twos and buy that aquatic life t5 hybrid that you can mount your radions into oooor the 60 inch ATI powermodule hybrid

 

[pommie]

I don't know what design flaw you speak of, but its likely a problem with your control box. If the temperature shown doesn't make sense its likely not communicating properly with the light.

To disable them, I would recommend either removing the LED Cluster, or the KSQ. You can find videos on both of these items on our ATI North America YouTube channel.

Thanks Keith, I know in Australia there was a bigissue with the LED lights flickering on earlier model Hybrids. If there is a fix for this issue then id rather try and apply it than remove them altogether.

Thanks though.

 

[Orcus Varuna]

looking at a 60 inch 8 bulb for our 72 inch tank... how do you guys like these? seems like I cant make up my mind on which direction to go for new lighting. Im coming from three radion gen twos. So far I have looked into radion gen 4 pros, keep the gen twos and buy that aquatic life t5 hybrid that you can mount your radions into oooor the 60 inch ATI powermodule hybrid

Output is very similar to my previous Hydra HD with t5 supplements setup but this is in one sleek fixture. My last setup was a rats nest of wires which I'm happy to be rid of.


Sent from my iPhone using Tapatalk

 

[AquaManiak]

I've been running my 6x54w fixture for a while now, while it looks great it is a bit too much for several of my corals (trachyphilia, one species of zoanthid, montipora and stylophora are clearly not liking it and show bleaching). I've started pretty conservative running the LED's at only 35% and only 5 hours max T5, but I've been forced to dim the T5 to 60% before completing break-in because it was just too much. Raising the fixture more might help but it's already at max height.

Are there more people experiencing this? Would love to see other lighting programs.

 

[Keith@ ATI NA]

I've been running my 6x54w fixture for a while now, while it looks great it is a bit too much for several of my corals (trachyphilia, one species of zoanthid, montipora and stylophora are clearly not liking it and show bleaching). I've started pretty conservative running the LED's at only 35% and only 5 hours max T5, but I've been forced to dim the T5 to 60% before completing break-in because it was just too much. Raising the fixture more might help but it's already at max height.

Are there more people experiencing this? Would love to see other lighting programs.

I want to highly discourage you from dimming prior to completing the burn in period. You will ruin the bulbs which will result in premature failure and spectrum shift. No matter what the reason, its a terrible idea to ignore this requirement.

I suggest you try some layers of window screen or some other "cover" if you are unable to raise the light higher.

Another option is to simply remove the light from your tank for 48 hours while burning in the bulbs (run them 48hrs straight) then return the light to your tank. Your corals would likely rather go 2 days without light (which is like a storm in nature stirring up sand) vs getting cooked.

 

[Radioheadx14]

Question, local reefer selling a 60" hybrid from 2015, guessing first model. Are there issyes with these units I should look for before buying or do they hold up pretty well? Price is really good, so I'm almost ready yo pull the trigger but want to make sure i do my homework.

 

[Keith@ ATI NA]

Question, local reefer selling a 60" hybrid from 2015, guessing first model. Are there issyes with these units I should look for before buying or do they hold up pretty well? Price is really good, so I'm almost ready yo pull the trigger but want to make sure i do my homework.

I'd say go for it, there really aren't any big known issues. Just like anything parts can fail on it but we have them available. Only thing I can think of that is a repeat offender is the very very first round had plastic reflectors for the LEDs not aluminum. These tended to turn brown or even melt. Ask the seller for photos of the LED clusters and you should be able to tell. Even if they are old replacement aluminum reflectors are available for $62.95ea so take that into consideration with your total purchase price. Make sure you get the USB cable too, these are very specific and frankly, expensive for what they are. It is not a best buy item you need to purchase it from us. The USB cable for the original is $25.95.

 

[Orcus Varuna]

I want to highly discourage you from dimming prior to completing the burn in period. You will ruin the bulbs which will result in premature failure and spectrum shift. No matter what the reason, its a terrible idea to ignore this requirement.



I suggest you try some layers of window screen or some other "cover" if you are unable to raise the light higher.



Another option is to simply remove the light from your tank for 48 hours while burning in the bulbs (run them 48hrs straight) then return the light to your tank. Your corals would likely rather go 2 days without light (which is like a storm in nature stirring up sand) vs getting cooked.

Coming from the world of non dimmable fixtures I didn't realize you had to burn the lamps in prior to dimming. Have I trashed my brand new bulbs if they were programmed to dim on and off from new? Or should I just look to replace them at 6ish months instead of 12-18? Thanks Keith


Sent from my iPhone using Tapatalk

 

[mike810]

Is there any issues with using a new bulb for say 100 hours, taking it off the fixture and storing it until you're ready to use again? Does this mess up the bulbs life span or spectrum?

 

[Keith@ ATI NA]

Coming from the world of non dimmable fixtures I didn't realize you had to burn the lamps in prior to dimming. Have I trashed my brand new bulbs if they were programmed to dim on and off from new? Or should I just look to replace them at 6ish months instead of 12-18? Thanks Keith


Sent from my iPhone using Tapatalk

What schedule were you running when they were brand new? This plays a major role in how much damage was done.

For example:
Ramping from 20-50% then back down again
vs
Ramping for 1 hour up to 100%, then back down again.

The longer the period of time at a low intensity when its new the more damage.

If you just ramped them up to 100% but they stayed at 100% for a good part of the day I would just use them until they burn out early, or in the 6-9 month timeline like you mentioned.

If you ran them at 50% (as in my example) I would probably replace them within a few months from now, but they will likely quit working well before 9 months.

 

[Orcus Varuna]

What schedule were you running when they were brand new? This plays a major role in how much damage was done.



For example:

Ramping from 20-50% then back down again

vs

Ramping for 1 hour up to 100%, then back down again.



The longer the period of time at a low intensity when its new the more damage.



If you just ramped them up to 100% but they stayed at 100% for a good part of the day I would just use them until they burn out early, or in the 6-9 month timeline like you mentioned.



If you ran them at 50% (as in my example) I would probably replace them within a few months from now, but they will likely quit working well before 9 months.

Thank you for the information Keith. They have been set on a 1hr ramp from 30-100% then 5hrs at 100% followed by a ramp down to 30%. I'll look to replace them at the good old Black Friday sale this year. Always learn something new in this hobby no matter how long you've been at it.



Sent from my iPhone using Tapatalk

 

[Keith@ ATI NA]

Thank you for the information Keith. They have been set on a 1hr ramp from 30-100% then 5hrs at 100% followed by a ramp down to 30%. I'll look to replace them at the good old Black Friday sale this year. Always learn something new in this hobby no matter how long you've been at it.



Sent from my iPhone using Tapatalk

Well this is about as good of a scenario as you could have when doing it wrong. While I would certainly replace them early it is not anything like someone only running them at 50%.

 

[mike810]

Well this is about as good of a scenario as you could have when doing it wrong. While I would certainly replace them early it is not anything like someone only running them at 50%.

Hi Keith,

Can you answer the question to my previous post?

Is there any issues with using a new bulb for say 100 hours, taking it off the fixture and storing it until you're ready to use again? Does this mess up the bulbs life span or spectrum?

 

[Keith@ ATI NA]

Hi Keith,

Can you answer the question to my previous post?

Is there any issues with using a new bulb for say 100 hours, taking it off the fixture and storing it until you're ready to use again? Does this mess up the bulbs life span or spectrum?

No issues doing that at all. If you have a dimmable fixture its a great idea to burn in all of your bulbs ahead of time, then you can swap in 1 bulb every other month or something similar so it is more consistent light all year round.

 

[mike810]

No issues doing that at all. If you have a dimmable fixture its a great idea to burn in all of your bulbs ahead of time, then you can swap in 1 bulb every other month or something similar so it is more consistent light all year round.

Thanks Keith! Appreciate the information.

 

[Joe0813]

ordering mine this week. a 60 inch for our 72 inch tank

 

[Alberth707]

Any body sell Ati 60" Hybrid 8bulbs ???


Sent from my iPhone using Tapatalk