DIY LEDs with Radion Pro G2 pucks?
- Thread starter rcmike
- Start date
djmx2002
Premium Member
DIY LEDs with Radion Pro G2 pucks?
Yep, the the non drilled one to save the extra 20$ and drilled the holes for the pucks myself.
I like it since it's pretty low profile, let me know if you have any questions regarding the harnesses
Yep, the the non drilled one to save the extra 20$ and drilled the holes for the pucks myself.
I like it since it's pretty low profile, let me know if you have any questions regarding the harnesses
sfsuphysics
Active member
Looks pretty spiffy.
But yeah no sense in getting predrilled heatsinks unless you want the exact spacing they use, aluminum is easy to drill holes in. Nicer if you have a drill press though
But yeah no sense in getting predrilled heatsinks unless you want the exact spacing they use, aluminum is easy to drill holes in. Nicer if you have a drill press though
kentuckyclowns
Member
Final product guys
I'm going to lend a par meter from the local club (my turn will most likely be in a month or two) really would like to know what the par compare to.
Trying to re-post so I can see the pics. I need to jump back on this. I'm down to the easiest part, connecting all the bucks to the controller and powersupply and just can't. Too nervous I'm going to fry something....
kentuckyclowns
Member
Holy cow. Those look awesome. Looking forward to getting back to working on these.
sfsuphysics
Active member
Now if I could just find someone dumping their G2 pucks for rock bottom rates to upgrade to G3 pucks. Unfortunately so far I've still see people wanting top dollar for them.
djmx2002
Premium Member
They are sending me a sample harness tomorrow hopefully it arrive next week or so...
Here are some pictures:
How does one get 4 of these?
Checking the company website, they want min orders of 500 or 1000.
Contact djmx2002 one post above yours, he ordered a handful of them at once to meet the minimum and might have some extras left. I got one from him and highly recommend it, fast shipping and professional quality instead of my DIY hack job.
thisishieu
New member
Interested but I can't pm you because this is a new account. PM me with price and paypal please.
djmx2002
Premium Member
I'm not sure how different the pin out is on the G1 pucks or if the connectors are the same but if they are you may be better off just getting a G2/G3 harness from djmx2002 and then just moving the pins to match the G1 pin out since you'd have to order like 20-30 harnesses which probably wouldn't be cost effective unless you can find someone to buy the extras or need them all.
djmx2002
Premium Member
Pretty much from alibaba. Just keep in mind that you will most likely need to order at least 20 and shipping is pretty high (paid around 60$ I think)
