FS/FT Extra stuff from my build

jet fixer

jet fixer

New member
I have some extra Misc. stuff from my build that I would like to trade for frags, as always cash is good. I'm specifically looking for Zoa's, Branching hammer, Acans, and Ricordia florida. The prices are OBO.

What I have:

1. 3x 10k aquaticlife 48" T5 bulbs used about a week @ 4hr/day $5 ea
2. 48" T5 KZ figi purple bulb used about one month @ 4hr/day $15
3. 48" UVL T5 Actinic white used about 10 minutes $15
4. 100w Via aqua Ti heater $15
5. 10x 5 Gal & 1x 3 Gal water cooler jugs; four of the 5g jugs do not have screw-on lids Free
6. Precision Marine sump 24"x11.5"x14" (photo below) $70
7. Misc plumbing parts 3/4" to 1 1/4" includes completed Hofer gurgle buster made from 1 1/4" tubing (below sump photo) $25
http://home.everestkc.net/jrobertson57268/HGB/HGB_construction.html
8. 38 mm Diamond glass hole drill bit (used for template and one hole) $5
9. 10ish feet 3/8" acrylic rod one 6' one 4' and several 2" sections $5
10. Quiet one 6500 pump w/ brand new impeller and ceramic shaft $65
11. Pura filter pads 2x 7.5"x10.5" and one cut up 15"x30" Free
http://www.marinedepot.com/PURA_Filtration_Pad_710_(7.5_inch_x_10.5_inch)_Filter_Pad_Mechanical_Filter_Media-Magnavore-MN3311-FIFMMEPM-MN3311-vi.html

Sump:
3739126231_0bfc39364b.jpg


Plumbing parts:
4477093789_48e9930355.jpg


The bulkheads are:
1" T/S
3/4" T/T
3/4" S/S
the lock line is 3/4"
 
Last edited:
Hi. I want the Hofer gurgle buster but I do not need any of the other plumbing parts. I need to make sure it will fit. Will you sell just the gurgle buster seperate for cheaper? I have a cpr overflow and not sure what size pvc it has hooked up but I think it is 1". Is that what you had for yours to use the silencer?

Also, I would really like your pura filter pads. Thanks.

Darren
darrenkaplan@cox.net
602-751-8850
 
dloveaz said:
Hi. I want the Hofer gurgle buster but I do not need any of the other plumbing parts. I need to make sure it will fit. Will you sell just the gurgle buster seperate for cheaper? I have a cpr overflow and not sure what size pvc it has hooked up but I think it is 1". Is that what you had for yours to use the silencer?

Also, I would really like your pura filter pads. Thanks.

Darren
darrenkaplan@cox.net
602-751-8850
Click to expand...

Darren
The tubing is 1.25", the "bell" is 2.75", the total length is 25" I have an adapter that fits a 1" threaded bulkhead. It can be cut to fit your overflow but I'm not sure on the minimum length it could go its early so I'm guessing 6" to 8" . How does $10 sound?
 
jet fixer said:
I have some extra Misc. stuff from my build that I would like to trade for frags, as always cash is good. I'm specifically looking for Zoa's, Branching hammer, Acans, and Ricordia florida. The prices are OBO.

What I have:

1. 3x 10k aquaticlife 48" T5 bulbs used about a week @ 4hr/day $5 ea Pending
2. 48" T5 KZ figi purple bulb used about one month @ 4hr/day $15Pending
3. 48" UVL T5 Actinic white used about 10 minutes $15 Pending
4. 100w Via aqua Ti heater $15
5. 10x 5 Gal & 1x 3 Gal water cooler jugs; four of the 5g jugs do not have screw-on lids Free
6. Precision Marine sump 24"x11.5"x14" $70
7. Misc plumbing parts 3/4" to 1 1/4" includes completed Hofer gurgle buster made from 1 1/4" tubing $25
8. 38 mm Diamond glass hole drill bit (used for template and one hole) $5
9. 10ish feet 3/8" acrylic rod one 6' one 4' and several 2" sections $5
10. Quiet one 6500 6000 not 6500pump w/ brand new impeller and ceramic shaft $65
11. Pura filter pads 2x 7.5"x10.5" and one cut up 15"x30" Free



The bulkheads are:
1" T/S
3/4" T/T
3/4" S/S
the lock line is 3/4"
Click to expand...

I'm going to split up #7 this afternoon depending on Darren's response
 
I think $10 sounds good....im just wondering how hard it is to build one, or if there is a better kind/model, but I am very interested. I will decide soon. Thanks.
 
Update

Update

As mentioned earlier I'm splitting up the plumbing parts, below is an updated list.

I'm thinking of Mt Biking SOMO Sat so I can meet folks from the east valley before or after to save you some of the drive (I'll be smelly after so be warned). If anyone wants to make it a group ride we start at the 46th St trailhead take the east loop to the pima lot climb the fire road then down Javallina back to the truck. I'm not sure on a time yet as my girlfriend is slow to get going in the AM I'm shooting for a 1030 FIP.

1. 3x 10k aquaticlife 48" T5 bulbs used about a week @ 4hr/day $5 ea
2. 48" T5 KZ figi purple bulb used about one month @ 4hr/day $15 Pending
3. 48" UVL T5 Actinic white used about 10 minutes $15
4. 100w Via aqua Ti heater $15
5. 10x 5 Gal & 1x 3 Gal water cooler jugs; four of the 5g jugs do not have screw-on lids Free Gone
6. Precision Marine sump 24"x11.5"x14" $70 Pending
7. Completed Hofer gurgle buster made from 1 1/4" tubing I'll include all the 1 1/4" fittings from the photo in 1st post $10
8. 38 mm Diamond glass hole drill bit (used for template and one hole) $5
9. 10ish feet 3/8" acrylic rod one 6' one 4' and several 2" sections $5 Pending
10. Quiet one 6000 pump w/ brand new impeller and ceramic shaft $65 pending
11. Pura filter pads 2x 7.5"x10.5" and one cut up 15"x30" Free
12. 3/4 loc-line, 20" in tubing 4 3" flare nozzles 1 wye 1 NPT connector w/anti siphon hole drilled in it.
13. Misc plumbing parts $5 includes everything in 1st post photo except Items #7 & #12 above.
 
Last edited:
sen5484 said:
am i still in line for the quiet one?

and ill take all the 3/4 loc line too

all jugs are gone?
Click to expand...

I tried to pm you my phone number and the site told me you elected not to receive them. can you pm me your phone number and a good time to call to make arrangements.
 
update

update

I've reduced some of the prices and deleted the stuff that is gone.

help me clean out the garage/closet



1. 3x 10k aquaticlife 48" T5 bulbs used about a week @ 4hr/day $5 ea or all 3 for $10
3. 48" UVL T5 Actinic white used about 10 minutes $10
6. Precision Marine sump 24"x11.5"x14" $50
7. Completed Hofer gurgle buster made from 1 1/4" tubing I'll include all the 1 1/4" fittings from the photo in 1st post $5
8. 38 mm Diamond glass hole drill bit (used for template and one hole) $5
10. Quiet one 6000 pump w/ brand new impeller and ceramic shaft $65 pending
11. Pura filter pads 2x 7.5"x10.5" and one cut up 15"x30" Free
12. 3/4 loc-line, 20" in tubing 4 3" flare nozzles 1 wye 1 NPT connector w/anti siphon hole drilled in it.pending
13. Misc plumbing parts includes everything in 1st post photo except Items #7 & #12 above. $5

The prices are not firm especially on the sump that thing is taking way too much room in the closet. I have the next two weeks off so I can make arrangements to deliver. I am open to frags also if you don't want to spend any cash.
 
interested in #3 48" UVL T5 Actinic white used about 10 minutes $10

and 6. Precision Marine sump 24"x11.5"x14" $50
can you post another pic of sump its not showing up for me.
 
You must log in or register to reply here.

Similar threads

C
RSM Max Nano XL Plan / Build
2
Replies
21
Views
2K
griss
griss
OrionN
Baby CB Regal Angel from Biota
Replies
8
Views
1K
OrionN
OrionN
Rpkneumann
BeanAnimal conversion of an 2005 Oceanic 150 GA Tank - possible?
Replies
9
Views
1K
Rpkneumann
Rpkneumann
bobafet1
Slowly coming back to the hobby
2 3
Replies
58
Views
5K
AZBigJohn
AZBigJohn
C
Coming back after 15 years...
6 7 8
Replies
156
Views
11K
ClarkiiClownfish
C
Back
Top