Ecotech, please, issue a super special graph. I need natural during the day that later at night gradually morphs into something like radiant graph and finishes with the moonlights for a couple of hours. I tried doing it myself but can't make the transition from natural to artificial modes. Did someone do that already?
I need a SUPER graph
- Thread starter Tornader
- Start date
erndog1001
Premium Member
Define a little better what you mean by "natural to artificial mode" pls?
Natural mode does not have moonlight period. In order to have moonlights I have to come up with artificial mode after natural is done. My lights have to be turned off before moonlights can be on!
erndog1001
Premium Member
Ok That's pretty easy to do. Next time your on ESL Open the tab called "Group Settings" You'll find an option there called "Lunar Phases" Set it to on.
Then you have to set a point on your graph out past your end of day point.Its up to you how many hours of moonlight you want.
That's going to become your new "shut everything off" point. Now whatever intensity you set becomes the intensity at full moon.
I.e. Mine end of day point is around 7:00pm
At this point my RB are at 100% with max intensity of 15%
This "Lunar Phase" goes until 10:30 pm .
So at full moon the max my lights are on is 15%
Its really very cool once you get it working.
Once you get that set up You're going to want to check out "Traveling Sunrise"
erndog1001
Premium Member
Are you saying you want moonlight for your whole night time phase?
Or you're worried that the lights are going to shut off at the end of daytime phase and come back for moonlight?
Or you're worried that the lights are going to shut off at the end of daytime phase and come back for moonlight?
Yes, the second scenario is happening. I don't want the light shutting off at the end of the day cycle and coming back for moonlights
erndog1001
Premium Member
Then you're not doing something right bc mine is seamless. The very end point of your daytime schedule is the beginning of the night/lunar phase.
So the settings at that point need to be whatever you want them for max moonlight
I.e. Mine is this.
Lunar phase begins at 7pm
100% RB Full moon intensity of 15%
At around 10:30pm its lights out for the night
All 0s and 0% intensity until morning
Also make sure when you set this whole thing up You do it during or close to full moon for where ever you are. Bc you can do it right and not much will happen if you are at or near a new moon.
So the settings at that point need to be whatever you want them for max moonlight
I.e. Mine is this.
Lunar phase begins at 7pm
100% RB Full moon intensity of 15%
At around 10:30pm its lights out for the night
All 0s and 0% intensity until morning
Also make sure when you set this whole thing up You do it during or close to full moon for where ever you are. Bc you can do it right and not much will happen if you are at or near a new moon.
Similar threads
