Jebao Cross Flow Pump

Yup! I have placed the magnets inside the overflow, but I assumed they are sealed..? If I'm wrong about that I have to figure out a way to seal them [emoji848][emoji848][emoji848]
So the wifi controller is the T1. The app can only sync 3 pumps, not 4, which is why I asked......

Sent from my Nexus 6 using Tapatalk
 
Magnets

Magnets

Not sure I would trust they are sealed. I am looking to do similar for either 3 rw20 on my 330 or 2 cross flow.

Yup! I have placed the magnets inside the overflow, but I assumed they are sealed..? If I'm wrong about that I have to figure out a way to seal them [emoji848][emoji848][emoji848]

What do you guys recommend for a 330 gallons 90x36x24?
 
I'll send a mail to the dealer and ask..



This was the answer to the question:
"No, it cannot using outside magnet in water"
..so I guess I'll have to figure out a way to seal the magnets.
Would it be a good idea to try a vacuum seal.. the type that's used for food, and make it double?
 
Would one of the cp40's work on a 60" tank I'm thinking of replacing my two rw8 with one heres a shot of my tank its 60x18x25
b933252f2e26f4960e30e4edbc462113.jpg
5ca01772c533cab7423e70c207478d16.jpg
 
Would one of the cp40's work on a 60" tank I'm thinking of replacing my two rw8 with one heres a shot of my tank its 60x18x25
b933252f2e26f4960e30e4edbc462113.jpg
5ca01772c533cab7423e70c207478d16.jpg

My tank is 60 x 24 x 20 and i have the gyre 150 on mine.

Running pulse mode and i only have it at 40% and it moves a lot of water.Have had it a few weeks now but haven't played around with it much other then just setting it up and finding a setting that worked. I do plan on trying to turn it up more but i have to rearrange some rock first.
 
My tank is 60 x 24 x 20 and i have the gyre 150 on mine.

Running pulse mode and i only have it at 40% and it moves a lot of water.Have had it a few weeks now but haven't played around with it much other then just setting it up and finding a setting that worked. I do plan on trying to turn it up more but i have to rearrange some rock first.
Nice thanks for the input what would be the best way to mount it with the center overflow to get the best flow throughout my tank
 
Nice thanks for the input what would be the best way to mount it with the center overflow to get the best flow throughout my tank

Not sure really on your setup

Mine has a castle wall type overflow on the left side of the tank with bean animal setup and the two returns are also coming out of the castle wall. I mounted the gyre on the opposite end of the tank.

Not the greatest pic due to lighting but you get the idea.
 

Attachments

  • image1.jpg
    image1.jpg
    51.1 KB · Views: 7
I just ordered one last night from aquatic deal let's see how it works I'm hoping I can get rid of the two rw8 to replace it with this
 
Am very confused of conflicting reports - some are saying that the Jebao cp40 is noisier/louder than the maxspect 150 , and some say they are about the same . Is this unit quiet or not ?
 
Hi! Been using one cp40 for 2 months now and I can assure you that it is very quiet. There was some noise the first few weeks but after the break in period has been whisper quiet.

Enviado do meu ASUS_Z00AD através de Tapatalk
 
Hi! Been using one cp40 for 2 months now and I can assure you that it is very quiet. There was some noise the first few weeks but after the break in period has been whisper quiet.

Enviado do meu ASUS_Z00AD através de Tapatalk
What size tank is it running in and what speed
 
It's a 150cm long tank. I have it really close to the surface at 50% speed. Have also a rw8 oposite for random flow.uploadfromtaptalk1467808314073.jpg

Enviado do meu ASUS_Z00AD através de Tapatalk
 
I hope to one set up today in my 25g frag tank. I hope it will run slow enough. I intend to have it run backwards under the egg crate rack to 'blow' up debris and the forward to blow it over the coast to coast weir.
 
had my cp-25 for less than a month. this morning it stopped working. the controller has a red light on labeled 'warning'. hopefully its just jammed.
 
Back
Top