ive heard good things about tropic marin. i also saw some test results involving TM, and a number of other brands of synthetic salts. TM Had very good numbers.
why cant you see how much waste water your producing?
all you have to do is get 2 cups of equal sizes (2 of the exact same drinking glass) turn on the unit, and let the product water drain into one cup, while the waste water drains into the other cup. the waste water cup should fill up 4 times in the same amount of time that the product water cup fills once.... its that simple.
if your getting less than 4 cups waste to 1 cup pure, then pull that inner tube out of the waste tube and cut 2 or 3 millimeters off the end, re-insert it into the watse tube, and run the flow test one more time.
be sure to cut just a little bit of the inner tube at a time. if you cut too much off, then thats it. you'll have to replace it. if your getting 5 cups of waste water per 1 cup of product water, then the inner tube is too short. although a 5 to 1 ratio should be fine. any more than 5 to 1 and the inner tube shold be replaced.
dont make me take anymore pictures!
