Matt's 5000ltr Display

Fantastic!!
From the project in 3D to the small bits and bobs here and there!
I will start a new progect in september 1800 liters I wish I could use a 3d software like that to plan it!
Very nice job!

Gerardo
 
Matt, just wondering if you really need a reef aquarium. With your graphic skills you could easily post up here a completed and mature reef and we'll never know if it's real or not:lmao: Had a hard time to differentiate reality from fiction on this thread for a while.....

Fantastic thread, build is just superb !!! This really is going to be be special. Any plans on the stocking yet and where will you source your stock from ?

I'll be back in blighty within the next week or so and will be staying with my folks in Manchester plus will be visiting relatives in Preston and Lancaster, could I call in for a cuppa ????? would love to see this in the flesh:bounce2:
 
m8 u are on fire!!!!

What a nice build!!!!!!!!!!!I am tagging along for sure!Keep the updates coming!
Click to expand...

Thanks Crazy_Beaver, updates to follow soon. I have taken the pics I just need to upload.
Fantastic!!
From the project in 3D to the small bits and bobs here and there!
I will start a new progect in september 1800 liters I wish I could use a 3d software like that to plan it!
Very nice job!
Click to expand...

Thanks Gerardo...get practicing in 3d before september!! I have been doing it for 15 years and I am still learning! I look forward to following your build thread.
Matt, just wondering if you really need a reef aquarium. With your graphic skills you could easily post up here a completed and mature reef and we'll never know if it's real or not Had a hard time to differentiate reality from fiction on this thread for a while.....

Fantastic thread, build is just superb !!! This really is going to be be special. Any plans on the stocking yet and where will you source your stock from ?
Click to expand...

Ha, Ha. It would be a hell of a lot easier to draw the perfect tank! Thanks for the compliments, you're very kind.

I'll be back in blighty within the next week or so and will be staying with my folks in Manchester plus will be visiting relatives in Preston and Lancaster, could I call in for a cuppa ????? would love to see this in the flesh
Click to expand...

Pm on it's way.
 
I had some time free and did a little more on the tank. The display tank still needs sanding and finalising for fibreglassing but due to the noise the sanding equipment makes and the times I had avaliable I decided to make a start on the fish room.

This is half of the fish room, filter room. Its the extension I had built to join the garage to the house. Behind this wall is where the tank is, you can make out the holes I drilled at the top of the wall.

IMG_5909.jpg


I battened out the walls and ran the cables.

IMG_5912.jpg


IMG_5914.jpg


I am trying to make the area as insulated as possible to help with maintaining constant temps so added some insulation to the wall

IMG_5916.jpg


IMG_5915.jpg


After the insulation came the plasterboard ready to tile ontop of

IMG_5917.jpg


One wall done

IMG_5918.jpg


2nd wall done and consumer unit in place

IMG_5919.jpg


IMG_5920.jpg
 
Looking good! That's some great progress. So are you going to tile the walls and floors of that whole room?
 
Hi. Not to be negative or anything, but did you seal the brick and masonry so the wood and plasterboard won't rot from moisture? Also, what's the pit in the corner of the floor for?

Dave.M
 
is it just a fish room?

is it just a fish room?

Matt, I have to borrow what Dave.M said on post #226 ((( >>> http://www.reefcentral.com/forums/showpost.php?p=18906131&postcount=226 ))

dave.m said:
... you cannot believe how much respect I have for Matt for doing so much of the build himself. The amount of money he would have had to pay someone else to design and build this tank would have been quite astronomical. His planning and foresight, as well as his keen intuitive sense of where to find bargains is truly inspirational. I'm sure you will both be well pleased with the result of this build.
Click to expand...

Cheers! :thumbsup:
 
D5HP said:
Looking good! That's some great progress. So are you going to tile the walls and floors of that whole room?
Click to expand...

Hi D5HP

Yes the walls and floors will be tiled.
Hi. Not to be negative or anything, but did you seal the brick and masonry so the wood and plasterboard won't rot from moisture? Also, what's the pit in the corner of the floor for?
Click to expand...

Hi Dave, I dont mind negative comments, the walls and floors will be tiled, the bricks were sealed with PVA glue initially. I dont expect any issues with moisture although I need to figure out a finish for the ceiling which at the moment is plain plaster board. The pit is a drain from when that area used to be outside, it will be very handy for ro waste, sink waste and water change waste.

Matt, I have to borrow what Dave.M said on post #226 ((( >>> http://www.reefcentral.com/forums/sh...&postcount=226 ))
Click to expand...

heers Euler
 
ohhhh progress now thats what i like to see :)

looks very good Matt how about polystyrene tiles to cover the ceiling?
 
I don't know how insurance works over the pond but over here I'd bring my agent to the house and inspect the tank, note the total price for replacement etc etc.
 
Forfend said:
I don't know how insurance works over the pond but over here I'd bring my agent to the house and inspect the tank, note the total price for replacement etc etc.
Click to expand...

Thanks Forfend. Over here, or atleast on my policy, I have to specify items worth over £1000 and increase the payments accordingly.

i can't tell which is a drawing which is a real picture. very skillful drawings!!!
Click to expand...

Thanks popper231, I work as a 3d illustrator/animator so I get to draw pictures daily.

D3hreeEurofightersmall.jpg
 
A small update

Insulation has been added to the ceiling

IMG_5950.jpg


The ceiling has been boarded

IMG_5952.jpg


I got some T8 strip lights and installed one so the light was better, its just got a plug on it for now until I get around to wiring up all the electrics.

IMG_5954.jpg


More holes were drilled for another two extractor fans

IMG_5959.jpg


And I made a start on the tiling

IMG_5962.jpg


IMG_5961.jpg
 
d3hree said:
Thanks Forfend. Over here, or atleast on my policy, I have to specify items worth over £1000 and increase the payments accordingly.



Thanks popper231, I work as a 3d illustrator/animator so I get to draw pictures daily.

D3hreeEurofightersmall.jpg
Click to expand...

Matt these are always needed for combat against Cyano:uzi:
 
You must log in or register to reply here.

Similar threads

Reef-Explorer
New Reef Building Project - Overflow Tower
Replies
9
Views
2K
wvned
wvned
D
Coral beauty Sick - how do i treat
Replies
3
Views
882
leebca
L
L
What to say
Replies
4
Views
1K
wvned
wvned
Brian60077
Building another new tank
2 3
Replies
49
Views
3K
Brian60077
Brian60077
A
New, but Not New to the Hobby
Replies
17
Views
2K
Guygettnby
Guygettnby
Back
Top