My 168g Cube Build!
- Thread starter jpitch
- Start date
martinphillip03
New member
Sand, or no sand?
Marty
Marty
Vinny Kreyling
Premium Member
JP,
Turn the pumps on & see what moves around.
Especially if I see gyres on the back wall.
Mine moves around with large flows.
Turn the pumps on & see what moves around.
Especially if I see gyres on the back wall.
Mine moves around with large flows.
jpitch
Premium Member
My 168g Cube Build!
The system is running. Fine tuned the main drain. It's finicky but its about dialed in. There are a couple spots where I can see bottom. I definitely can't run the gyres over 70%. The gyres are noisy. I thought I was prepared for the noise from all the reports. Hopefully a week will quiet them down.
Sent from my iPhone using Tapatalk
The system is running. Fine tuned the main drain. It's finicky but its about dialed in. There are a couple spots where I can see bottom. I definitely can't run the gyres over 70%. The gyres are noisy. I thought I was prepared for the noise from all the reports. Hopefully a week will quiet them down.
Sent from my iPhone using Tapatalk
jpitch
Premium Member
Thank you! There's a big cave in there you can't see. Once the lighting is installed I'll post a better pic.
Sent from my iPhone using Tapatalk
Usernam Invalid
New member
The build really starting to come together nice job Jon [emoji106]
martinphillip03
New member
Looking good!
Marty
Marty
jpitch
Premium Member
We have a problem. I can't find the other 2 power supplies for my kessils. As you can see the canopy is partially built. The lights are a tad high from the water surface. I should be getting the piano hinge tomorrow. I'm also waiting on some more pvc elbows to connect the loc line.
Sent from my iPhone using Tapatalk
Similar threads
