New SPS Shadow Tank in HK

michael.hts

New member
Hi,
After nearly 2 years experience in SPS ,

I am going to have a bigger Tank in my new home.

Here are my old tank before:
20130104_213053.jpg

20130104_213103.jpg


http://www.reefcentral.com/forums/showthread.php?p=21070561&posted=1#post21070561

And the coming size is :

67" x 30" x 20" Shadow SPS Tank
67.jpg


Please give me some advise.

Cheers
:beer:

Michael
 
Thanks bro

Here are the information and the equitment list.:beer:
Please correct me if I did something stupid.:frog:

MAIN TANK : 67" x 30" x20" ( WATER LEVEL 17 " ), 2 PIECES 6/8 PPG GLASSES
SUMP : 38" x 19" x 27"
ATO,AWC :13" x 20" x 26"

Equitment :

Skimmer
- Vertex Alpha Cone 200

Return & Wave
- Red Dragon RD3 8000L/h
- Vertex Mocean 3500 with Tunze 6095
- Tunze 6095 x 1
- Tunze Wavebox 6215

Temp.
- 1 HP Chiller & 500W titanium

Lighting
- 2 x Radium 20000K 400w with Icecap Ballest + 4 x 36" T5HO + 4 x 24" T5HO
- LED light ( sun rise / sun set, moon phases, clouds and thunderstorms)

Filter System
- Zeovit system
- Carbon

Doing
- Dosing pump 7 heads
- Calcium Reactor

Controller
GHL Profilux 3ex
- Lighting + moonlight
- Temp Control
- PH / ORP Control
- Tunze Control
- ATO Control
- AWC Control
- High / Low temp cut
- Internet Monitoring & Control
 
Well your "old tank" looks pretty nice.

With that shopping list for your new tank, I'm sure it's gonna be even better. You definitely have all the right stuff.

With a new apartment to place it in too. You are on a roll.:)
 
Thanks everybro .
The tank will come arrived at Feb.

I am cleaning the old rocks with h2o2 and planning for my new
Aquascape.
Any idea for this?

Send from Michael's Galaxy S3
 
Controller
GHL Profilux 3ex
- Lighting + moonlight
- Temp Control
- PH / ORP Control
- Tunze Control
- ATO Control
- AWC Control
- High / Low temp cut
- Internet Monitoring & Control

Since you have a ProfiLux P3eX you should also add the Salinity (conductance) probe. It should already have that module/card installed in the controller.


Have you looked into the GHL Mitras LED? Would be SWEET over the new tank in the new apartment :)
 
Gonna be awesome... new apartment, new tank... life is good! Good luck with the build.

Thanks bro.
Hope everything going well.It is little hurry due to the Chinese New Year coming,
every factory will stop working in these period:headwally:

Since you have a ProfiLux P3eX you should also add the Salinity (conductance) probe. It should already have that module/card installed in the controller.
Have you looked into the GHL Mitras LED? Would be SWEET over the new tank in the new apartment :)

Thanks.
Will come with Salinity so soon.
And I had try a lot of LED before,Maxspect G2 , Mazarra P , DIY 550W etc...
But I found the 20000K HQI have the best result for SPS beside heat:(

So this time , I hope to setup a lower density rock and coral placing with 2 HQI only.

But I am wondering 3 to 4 Tunze 6095 are flow enough for the corals.

And idea about the flow?:beer:
 
Hi Michael

Looks like a great start. Who made your tank and stand? Looks like Tak and Mimi? Tagging along!
 
Hi Michael

Looks like a great start. Who made your tank and stand? Looks like Tak and Mimi? Tagging along!

Hi,
The tank was made by 17/f.
But it is too hurry to settle down after moving.
Nice to meet to in RC!
Are you a reefer in reef.hk?

Send from Michael's Galaxy S3
 
Very busy recently.
Today,my friend come to help me set up the aquascape.He is the master of aquascape design!

IMG-20130205-WA0010_zpsd0ed384d.jpg


IMG-20130205-WA0011_zpsc6af8f93.jpg


Send from Michael's Galaxy S3
 
Back
Top