Merrell056
New member
Hi everyone! I finally finished my tank stand/desk combo and I'm working on the plumbing now for my sump/refugium. I have a 40 breeder DT and a 20g tall sump. Here are my thoughts:
3 holes drilled in the bottom for a mid-back overflow. 2 1" drains with one as a full siphon about 3" below the overflow water level and one overflow. I can't recall the name of this specific design at the moment but it was very quiet. The 3rd hole will be a return line at 1.5".
Mag 3 return pump. The return line will be about 3.5' above the pump itself. Is the Mag 3 big enough? Will my plumbing support the flow?
I plan on a 3 chamber sump. First is drain/skimmer, second is refugium and 3rd bubble trap/return pump.
If anyone can help I would greatly appreciate it. General comments and suggestions are greatly appreciated as are links to articles and info on plumbing. I haven't been able to find a definitive "Use this plumbing for a 40 breeder" guide so I am going by what I have pieced together from random posts which is why I am seeking advice. Thanks in advance!
3 holes drilled in the bottom for a mid-back overflow. 2 1" drains with one as a full siphon about 3" below the overflow water level and one overflow. I can't recall the name of this specific design at the moment but it was very quiet. The 3rd hole will be a return line at 1.5".
Mag 3 return pump. The return line will be about 3.5' above the pump itself. Is the Mag 3 big enough? Will my plumbing support the flow?
I plan on a 3 chamber sump. First is drain/skimmer, second is refugium and 3rd bubble trap/return pump.
If anyone can help I would greatly appreciate it. General comments and suggestions are greatly appreciated as are links to articles and info on plumbing. I haven't been able to find a definitive "Use this plumbing for a 40 breeder" guide so I am going by what I have pieced together from random posts which is why I am seeking advice. Thanks in advance!