anyone tried to using Jebo WP40?

[Aperture.pcs]

Group buy for this anyone?

 

[nightOwl]

For those that have the pump if you were to divide the side of your tank into a tic -tac- toe board which quadrant are you placing the pump in? I plan on playing around with it this weekend.

 

[ctlegacy]

Group buy for this anyone?

I tried to get 50 of them, but there's no deal on shipping.

 

[bhazard451]

I tried to get 50 of them, but there's no deal on shipping.

You would have to go through jebao themselves.

 

[geaux xman]

i'm going to tell mr chingchai to get some of these wp40 for his big tank.

 

[SPotter]

For those that have the pump if you were to divide the side of your tank into a tic -tac- toe board which quadrant are you placing the pump in? I plan on playing around with it this weekend.

I will need you to decipher this for me once you have it figured out.


Sent from my iPhone using Tapatalk 2

 

[barry_keith]

For those that have the pump if you were to divide the side of your tank into a tic -tac- toe board which quadrant are you placing the pump in? I plan on playing around with it this weekend.

Mines in the center, and pointed slightly upward.

 

[nightOwl]

I will need you to decipher this for me once you have it figured out.


Sent from my iPhone using Tapatalk 2

Steve - I probably should have said 3x3 grid lol.

 

[SPotter]

Steve - I probably should have said 3x3 grid lol.

I meant the apex hook up.


Sent from my iPhone using Tapatalk 2

 

[coryjones]

here is a video of my wp-40 on my 60 cube on a 15v powersupply

http://s289.photobucket.com/albums/...=view&current=20130309_131218_zps340e86a7.mp4

 

[SimonSKL]

here is a video of my wp-40 on my 60 cube on a 15v powersupply

http://s289.photobucket.com/albums/...=view&current=20130309_131218_zps340e86a7.mp4

You don't have much room to play with the wave mode!

 

[chercm]

here is a video of my wp-40 on my 60 cube on a 15v powersupply

http://s289.photobucket.com/albums/...=view&current=20130309_131218_zps340e86a7.mp4

nice !!!

 

[Frode]

Here is a photo of the test harness that Roberto from Reefangel constructed. Hopefully he does not mind me posting it here. As they say, a picture is worth a thousand explanations :eek2:

In the above photo:

the blue wire appears to be ground
the yellow wire is the +5V analog control signal (labelled VA on the controller's board)
the brown wire is the +24V DC

The white wire is the connector for the 0-10V analog connected between ground and +5V analog input to the pump. Remember you have to keep the signal from your device toa maximum of 5 volts.

Dennis

That's great Dennis, big thanks for posting here.

 

[nightOwl]

I meant the apex hook up.


Sent from my iPhone using Tapatalk 2

Sounds good

 

[rrasco]

You don't have much room to play with the wave mode!

That's what I am worried about with mine. I only have 3/4" from water to rim. :uhoh3:

 

[toofrigginswt]

I just ordered one to try out too.

 

[floyd78]

Anyone having problems with the light sensor working right? Mine will work fine if you have the lights on and you cover the sensor with your finger; but if you actually ually turn the lights off it flips to night mode then goes back to regular mode....???

Sent by Samsung Galaxy Note 2 and Tapatalk 2

Yeah same problem hear soon to be solved with Apex control.

 

[floyd78]

bhazard451 thanks for completing the setup with the Apex. I had great hope that it was going to work out great! I am going to order another apex to get it working fully on my end. The whole sensor thing is kind of driving me crazy I just had to unhook it. So know I just have wave mode 24 7.

 

[SimonSKL]

bhazard451 thanks for completing the setup with the Apex. I had great hope that it was going to work out great! I am going to order another apex to get it working fully on my end. The whole sensor thing is kind of driving me crazy I just had to unhook it. So know I just have wave mode 24 7.

You can try a timer to turn it off at night.

 

[nettraptor]

does anyone know the connectivity of the wires ? what is the VCC ,GRND and PWM?

from this picture...???? i dont whant to open the controller...