ATI Powermodule Hybrid Club

Here some picts from today.
uqybu3em.jpg

3evudape.jpg

sy9age5a.jpg

7unu5eja.jpg


Late evening shot
re6yqa2a.jpg

enyzaqaz.jpg

gu7yvasa.jpg


I love the setting now but making a good photo is not easy with the iphone on the pict is it alot off blue in the real great.

Greets wesley
 
@ Wesley: Looking great man. How do you keep the reefbone so clean... your tankwater must be perfect. Keep up the fantastic reefing ;-)l

@ Sahin: An other question about the ATI software. How can I copy/paste the .xml file in an email. I can find the file by opening the program, but it doesn't exist on my C drive...

The lightningbeast is over the tank for 4 days now, T5 runs on 100%, Leds on 20%. What diference even at this low %... And Sahin we love the red sunset alot! Thanks again! Corals seem to have no problem so far. But we keep a close watch to that. After a week go 10% up, I think...

Today is the firsttime I can see the whole syclus... so I've been up to urly...

I'll try to post some pics later this day, but I need to buy af real camera, I think....
 
@ Wesley: Looking great man. How do you keep the reefbone so clean... your tankwater must be perfect. Keep up the fantastic reefing ;-)l


Thnx man.
The reef bones is my new setting from sunday.
I hope that they stay so clean.
I give a lot off bacteri now.
This weekend i post some new picts.


Greets wesley
 
Here some pictures from today i see that the corals like the t5 light.

uzyja3yb.jpg

yhene8ur.jpg

e5e4ujy2.jpg

ybysy6y9.jpg

ujy4unej.jpg
.


Can somebody tell me how i make better fotos withe the iphone 5.
It seens so mutch blue om the photos.

Greets wesley
 
Here some pictures from today i see that the corals like the t5 light.

uzyja3yb.jpg

yhene8ur.jpg

e5e4ujy2.jpg

ybysy6y9.jpg

ujy4unej.jpg
.


Can somebody tell me how i make better fotos withe the iphone 5.
It seens so mutch blue om the photos.

Greets wesley

Wesley, unfortunately you cant. The Iphones do not have any white balance adjustments so all photos will always come out blue.

You can try opening the camera software with the camera already pointing at the tank...maybe that will force the camera to adjust.

Or place an orange/yellow filter in front of the camera lens; that will remove much of the blue.
 
Could anybody give a suggestion on bulb selection for a 4 bulb 36" fixture? Tank is going to be predominantly SPS and some softies. Going for a 16-18k look.

Also, is the program software Mac compatible yet. My fixture will be here on Wednesday!
 
Could anybody give a suggestion on bulb selection for a 4 bulb 36" fixture? Tank is going to be predominantly SPS and some softies. Going for a 16-18k look.

Also, is the program software Mac compatible yet. My fixture will be here on Wednesday!

2x ATI Blue+ and 2x ATI Coral+ With two Clusters you will have plenty of adjustment ability, so you can adjust the LED channels to your liking.

With regards to MAC, I dont know of any compatible software at the moment.
 
Thanks Sahin. I was able to find a great deal on a 36" 4 bulb fixture with included bulbs (3 blue+ and 1 coral+). I'm hoping it will cover my 48x24x16 shallow reef. I'm making the switch from a Radion Pro and am hopeful to see better sps/lps color all around.
 
Turns out the power supplied failed, have a replacement which worked when testing, will get the light back up over the weekend.
 
Hi guys,

Im a new member and have just bought the 48" 3led 4t5 power module. I have read the thread and spent time following Sahin's instructional video. Since im coming from a full led light set, i want to set the leds to about 40% and the t5s to 100% to burn them in before dimming. Have done the programming quite easily but i cannot save the program to the lamp as i encounter "error while writing device" message at 78% of the way while saving it.

Has anyone else experienced this? How did you solve this issue?

Any help would be much appreciated.

Thanks.
 
Hi guys,

Im a new member and have just bought the 48" 3led 4t5 power module. I have read the thread and spent time following Sahin's instructional video. Since im coming from a full led light set, i want to set the leds to about 40% and the t5s to 100% to burn them in before dimming. Have done the programming quite easily but i cannot save the program to the lamp as i encounter "error while writing device" message at 78% of the way while saving it.

Has anyone else experienced this? How did you solve this issue?

Any help would be much appreciated.

Thanks.

I believe someone else had the same issue a while back earlier on in the thread. It could be two things:

1. The Controller doesnt know how many LED clusters you have, or;

-Search this thread for the the Secret Menu option (it was member rtparty (Ryan) who posted it and ensure the controller has the same LED cluster numbers as your fixture (ie 3).

2. USB/Windows issue.

- Uninstall the ATI software, restart Windows completely and then install the latest version of the software from ATI America website. Try upload a program again.
 
Turns out the power supplied failed, have a replacement which worked when testing, will get the light back up over the weekend.

Thanks for letting us know. Did you have to pay for the replacement controller or did ATI offer one for free?
 
Hi guys,

Im a new member and have just bought the 48" 3led 4t5 power module. I have read the thread and spent time following Sahin's instructional video. Since im coming from a full led light set, i want to set the leds to about 40% and the t5s to 100% to burn them in before dimming. Have done the programming quite easily but i cannot save the program to the lamp as i encounter "error while writing device" message at 78% of the way while saving it.

Has anyone else experienced this? How did you solve this issue?

Any help would be much appreciated.

Thanks.


I had have the same problem and this works every time. Try this.
owermodule Reset
Up
Left
Down
Right
Up
Right
Down
Left
Center

Settings:
Number Spots: 3
 
I've had my new light operating for about a month and a half now. It's a 48" 4 X t5, 3x LED clusters. Now, I seem to be having a problem with one of my clusters. The "Red" LED's in one cluster, are flickering, as the lamps ramps down from Coral plus, to Royal blues, for the evening. Anyone else have a similar problem? Would this be a cluster module problem, or a controller issue?
 
Thanks Sahin and CoopsReef. I have found Ryan's post which was exactly what CoopsReef posted. I will try the instructions out later when I get home from work.
 
Back
Top