ATI Powermodule Hybrid Club

[slap]

the t5 channels my hybrid can no longer be independently dimmer. either a software bug, or a defect of the control unit. :headwalls:

in January comes my Giesemann dimtec t5 and I'm finally going on this ATI nightmare !! :thumbdown

 

[Przemek_PacSun]

Hello The fans in my 8×54W+ 3×75W are very loud. IT seems that they are working in max speed. I have this problem for 3-4month. Before it was very quite. In my opinion it's a problem with the control device of the fans. Do have any idea what to do?

Hi Sever,
You need to change hybrid lamp for another one ;-)
Regards

Przemek

 

[Learn It]

these tanks are awesome...definitely want one of these lights when I settle into a new home

 

[Adamc1303]

Check this out. my 60" Powermodule with BML added to it. I think it looks great. You need a flat bracket. I got one from reefbrites but you can use any flat bracket that can be found at Lowes or Home Depot near the "L" brackets. I screwed that it into the fixture using screws that came from the ATI fixture and holes that are already there. I just took out one of the many screws which hold the fixture together and put it right back except that it now holds the bracket to the fixture as well. Then and L bracket mounted to the BML strip again using screws and nuts that came with the BML strip this time. Then a screw and nut from the BML to the Reefbrite bracket. I got the screw, nut and L bracket from home depot. Check it out!

https://www.dropbox.com/sh/pai3hn077ce5va1/AADBzsGQVLe0n07AiQ7e_MQ-a?dl=0

 

[Nccowboy15]

has anyone had trouble with the USB connection? I have had the 48" 4 bulb model for about 2 weeks now. Today I went to update my programming and when I connect the fixture through my USB the blue dots do not light up in the ATI software. The port is working so I know its not the computer. Any help is appreciated! Thanks

 

[ClownsRCoo]

I had that happen and I bought a new cord and it works fine now

 

[bucfan]

My light randomly turns off then back on. Not sure why. Yesterday at midday LED temp was 45 deg C. Is that high?

 

[Nccowboy15]

Thanks clownsrcoo. I contacted ati yesterday so I'm hoping a quick trouble shoot session today will reveal a simple quick fix like that.

 

[Nccowboy15]

Buc that's 113 Fahrenheit .... Sounds pretty hot to me

 

[bucfan]

Buc that's 113 Fahrenheit .... Sounds pretty hot to me

Seems that way. What must I do?

 

[bucfan]

FYI light temp is 25 now when T5 off. Possible broken fans?

 

[Bluecorals]

I just mounted my 48" Powermodule Hybrid LED and now I realize that the cable is not long enough to be routed from the back side of my tank to the electronics chamber.

Do they make an "extension cord" for the light plug? Worst case, I'll have to mount my ATI box on the wall on the right side of the tank.

Would you share with us the light hanger you are using for your fixture over a rimless tank?
Thanks in advance

 

[Kengar]

Is there supposed to be a user manual? I didn't see one in the box for either unit I bought (two 3-footers), nor do I find one online. Am I supposed to figure it out just by playing around with the lighting software?

 

[ClownsRCoo]

It's pretty simple. I bought mine used from somebody and had s program in 15 min.... Not much to it.

 

[Kengar]

Poking around here and there, I've seen reference to burn-in times. Where is that information found?

 

[ClownsRCoo]

Don't know for sure but I've seen 100 hrs mentioned a lot before

 

[Kengar]

100 hours of what? On full blast before you start to ramp them up or down?

 

[ClownsRCoo]

100 hrs at 100% before you start to dim new bulbs. I don't think it makes one bit of difference for the unit itself

 

[Nccowboy15]

I had that happen and I bought a new cord and it works fine now

Thanks for the help they determined my problem was likely the same as what yours was. Fingers crossed its an easy fix when new cord arrives.

 

[bucfan]

Can anyone let me know what their temp is when only LEDs on, 4 T5s on and all 8 T5s on? Mine is 25, 35, 45 degrees C respectively. Seems a bit too hot. Also my 3 fans running the length of my unit don't turn on. Only 4 fans in middle labeled ATI run. Been in touch with ATI but it's been a sort of a back and forth with tech support on Friday and they closed now.