automatic water change
- Thread starter DRThompson
- Start date
AquamanE
Active member
Dave- Apex idiot here. If i get a salinity probe, what other module do i need to get?
AquamanE
Active member
Very spirited discussion
Still think the Stenner is the best option?
RPS3- makes everything spirited. He's a hard headed kid. :hmm3:
Until proven otherwise Stenner is best option.
AquamanE
Active member
However- i did mention in post #985 that Spectrapure will be sending me a Litermeter to perform a comparison experiment.
nuxx
.Registered Member
DRThompson
2018 FMAS President
PM2 module though I'm not sure it helps, here's a graph of mine over 1 week
<a href="http://s1072.photobucket.com/user/pharmd99/media/conductivitygraphapril12014_zps522e830c.jpg.html" target="_blank"><img src="http://i1072.photobucket.com/albums/w362/pharmd99/conductivitygraphapril12014_zps522e830c.jpg" border="0" alt=" photo conductivitygraphapril12014_zps522e830c.jpg"/></a>
Stenner is the best for a quick set up.
They have other pumps that you can adjust flow on each head as well. Same thing more or less as adjusting the tubes. Stenners from what I see don't have that option. You have to "restrict" it some how just like tightening up the tubes.
It's all common sense guys...
They have other pumps that you can adjust flow on each head as well. Same thing more or less as adjusting the tubes. Stenners from what I see don't have that option. You have to "restrict" it some how just like tightening up the tubes.
It's all common sense guys...
AquamanE
Active member
Why a hesitancy "if it helps?". I think you can see a trend there in the past 2 days. Is that number PPT, or just a random number.
running the masterflex heads here
I was one of the first to get it up and running, if not thee first on these other pumps, and I've also been doing over 20% a week water changes... a full box of reef crystals and part way through the 2nd bag of the next box on only a 75g system...
I started at 1.026, I mix to 1.026, and I'm still 1.026 since I've been up and running. My mixing barrel is level with my sump and I feed down under the house to the drain, so no head pressure, if anything a little bit of suction on the return line but I doubt it has any.
Do these stenner pumps you guys are using have fixed rollers or are they the spring loaded ones that have adjustable tension?
I was one of the first to get it up and running, if not thee first on these other pumps, and I've also been doing over 20% a week water changes... a full box of reef crystals and part way through the 2nd bag of the next box on only a 75g system...
I started at 1.026, I mix to 1.026, and I'm still 1.026 since I've been up and running. My mixing barrel is level with my sump and I feed down under the house to the drain, so no head pressure, if anything a little bit of suction on the return line but I doubt it has any.
Do these stenner pumps you guys are using have fixed rollers or are they the spring loaded ones that have adjustable tension?
Chris155hp
Member
They are fixed
AquamanE
Active member
So Eddie after you get the Litermeter, test it and decide that's they way you want to go would you sell the Stenner at half price.
youll have to wait and see wont you, lol. :wave:
SpectraPure
.Registered Member
Lending?
Lending?
Eddie,
We will not be lending, but we will be donating this equipment to the club. After you tinker with it, and display your results on the forum; you can raffle it off for a lucky club member.
We appreciate your club, and all fellow reefers!
Jeremy
Lending?
Eddie,
We will not be lending, but we will be donating this equipment to the club. After you tinker with it, and display your results on the forum; you can raffle it off for a lucky club member.
We appreciate your club, and all fellow reefers!
Jeremy
nuxx
.Registered Member
Very nice of you guys! :love1:
SpectraPure
.Registered Member
Nice of me?
Nice of me?
I want to thank all of you for your support. I know that some of you use the Spectrapure products, and my customers mean everything to me. I am not required to go on the forums after work hours, but often I will get on at home. IF anyone has any questions about RO, RODI, ATO, AWC, etc. I will do my best to answer technical questions.
I hope that you all have a fantastic day, and if I ever overstep my boundaries on your forum please let me know. The last thing that I want to do is upset anyone.
Thank you very much.
Jeremy
Nice of me?
I want to thank all of you for your support. I know that some of you use the Spectrapure products, and my customers mean everything to me. I am not required to go on the forums after work hours, but often I will get on at home. IF anyone has any questions about RO, RODI, ATO, AWC, etc. I will do my best to answer technical questions.
I hope that you all have a fantastic day, and if I ever overstep my boundaries on your forum please let me know. The last thing that I want to do is upset anyone.
Thank you very much.
Jeremy
nuxx
.Registered Member
Jeremy,
What would your kit consist of to do the following:
- Remove X Gallons from Sump to Drain
- Replace same X Gallons from storage container to Sump
What's the complete list of hardware you'd need?
