Free Sketchup Renderings *inquire within*

[emilecilliers]

Yes thats what I was thinking about.Its seems weak at the rear and maybe the front without bracing. maybe a eurobrace?
I dont know you guys know the math?
I sent the design to a shop this morning and with Low iron glass at the front they recon £600(about $900).Thats without the stand.
I can build that myself.I have knowledge of welding,use to weld steel construction.

I do however think im going for 3 x 250 mh with built in actinics(prob 14k mh)
Any other suggestions?

Im now thinking of the finish of the cabinet.
What do you guys think,this must be totally unique.
I was thinking brushed aluminium,does it rust?can i coat it to protect it.
I would like to try a diffrent material than wood or would that spoil it

 

[emilecilliers]

that back corner yourtalking about you could silicon a nice piece of angel iron on it as it wont be seen.just a suggestion

 

[~sp0ok~]

<a href=showthread.php?s=&postid=14521566#post14521566 target=_blank>Originally posted</a> by uncleof6
Hey I have been meaning to say, Thank you for your service! also, I served 13 years in Army.

Thank you for your Service!!

Regards,

Jim

ty.....and good work jim

if u can u look at my steel stand i will post it..............

and yw Esquare

 

[uncleof6]

<a href=showthread.php?s=&postid=14525924#post14525924 target=_blank>Originally posted</a> by emilecilliers
Yes thats what I was thinking about.Its seems weak at the rear and maybe the front without bracing. maybe a eurobrace?
I dont know you guys know the math?
I sent the design to a shop this morning and with Low iron glass at the front they recon £600(about $900).Thats without the stand.
I can build that myself.I have knowledge of welding,use to weld steel construction.

I do however think im going for 3 x 250 mh with built in actinics(prob 14k mh)
Any other suggestions?

Im now thinking of the finish of the cabinet.
What do you guys think,this must be totally unique.
I was thinking brushed aluminium,does it rust?can i coat it to protect it.
I would like to try a diffrent material than wood or would that spoil it

Reply is in your thread.

Regards,

Jim

 

[uncleof6]

<a href=showthread.php?s=&postid=14526121#post14526121 target=_blank>Originally posted</a> by ~sp0ok~
ty.....and good work jim

if u can u look at my steel stand i will post it..............

and yw Esquare

Post it where? :rollface:

sure no problem.

Jim

 

[WZHANG]

Looking good Jim! Really good!

I need to dust off the ol' hypershot, I'm feeling rusty, lol.

One thing I have found is that the metal textures in hypershot don't read very well. I'm starting to prefer using the metalic paint instead.

 

[uncleof6]

<a href=showthread.php?s=&postid=14529028#post14529028 target=_blank>Originally posted</a> by WZHANG
Looking good Jim! Really good!

I need to dust off the ol' hypershot, I'm feeling rusty, lol.

One thing I have found is that the metal textures in hypershot don't read very well. I'm starting to prefer using the metalic paint instead.

Well if is isn't the lone stranger! Thanks for the compliment. Yeah I noticed that the stand did not "pop" like the rest. Will have to give the metallic paints a go.

Regards,

Jim

 

[WZHANG]

<a href=showthread.php?s=&postid=14529462#post14529462 target=_blank>Originally posted</a> by uncleof6
Well if is isn't the lone stranger!

lol.

Here's perhaps an idea for emilecillier's stand perhaps..

I don't think the design is there yet, but lemme think about it.

I missed this a few pages back:
Chibils

and I forgot to post this one:
jma1978's

and do this one:
jma1978's

 

[~sp0ok~]

bump

http://sketchup.google.com/3dwarehouse/details?mid=a89e218edef6beeb18850761e9d935ac

 

[emilecilliers]

Thanks WZHANG,cant wait to see what you have in mind for the stand.

 

[uncleof6]

<a href=showthread.php?s=&postid=14542300#post14542300 target=_blank>Originally posted</a> by ~sp0ok~
bump

http://sketchup.google.com/3dwarehouse/details?mid=a89e218edef6beeb18850761e9d935ac

I just sorta blew this out, needs some mods, and some more work, take some time.

Regards,

Jim

 

[k9asia]

How do i make a pipe bend IE,. 90 in sketchup?

 

[jma1978]

<a href=showthread.php?s=&postid=14557027#post14557027 target=_blank>Originally posted</a> by k9asia
How do i make a pipe bend IE,. 90 in sketchup?

Try this tutorial: Pipe bends

 

[~sp0ok~]

<a href=showthread.php?s=&postid=14543662#post14543662 target=_blank>Originally posted</a> by uncleof6
I just sorta blew this out, needs some mods, and some more work, take some time.


Regards,

Jim

looks good

ty

 

[uncleof6]

Here is a teaser on spooks concept design. The tank is a Visio 125, black silicone, diamond edge. Decent tanks and easy to come by. Work iin progress.

Regards,

Jim

 

[k9asia]

Jim What program are you using?

 

[uncleof6]

<a href=showthread.php?s=&postid=14562730#post14562730 target=_blank>Originally posted</a> by k9asia
Jim What program are you using?

Bunkspeed Hypershot Pro.

Regards,

Jim

 

[disaster999]

WZHANG, you mentioned before you can render solidworks files. i just finished putting together a little something something, just wondering what i should send you and how should i send you my files.

 

[uncleof6]

Bump

An update on spooks design:

Jim

 

[~sp0ok~]

wow jim.. :thumbsup:

ty