MRC Club

Status
Not open for further replies.
pump

pump

<a href=showthread.php?s=&postid=8097105#post8097105 target=_blank>Originally posted</a> by Fishie Nut
Not really, but I could build a shelf above the sump for the pump.

Will a pressure rated pump make it run more efficiently and consistently? If so, I'll have to break down and get one.

What sizes are best -- a range?
Click to expand...
Iwaki MD55RLT pump.
 
dannieboiz 40 rxt is for flow only will not work very well on that skimmer.Dual becketts need a large pump and LARGE watts are used to make the pump work. Used just one beckett and a MD55RLT pump and the skimmer will do a good job.The pump i used on skimmer is a MD55RLT and one beckett,i could put on more becketts and larger pump i have them all do not to buy them but i do not used them.
Ralph
 
I only have a single Beckett. MRC recommends the PCX55 HP GenX pump. It's much less expensive than the Iwaka -- quality aside.
 
Air line

Air line

<a href=showthread.php?s=&postid=8096393#post8096393 target=_blank>Originally posted</a> by Sparky0028
RGibson
I could cut the air down till it skims properly but then after 24 hours or so it will not skim at all because there is too little air.
Thanks.

Rich
Click to expand...
Have you chech the air line after 24 hours to see if there is water in the air line.
 
RGibson
Not sure what air line you are referring too, if it is the valve on the beckett, no there is no water. Thanks for the reply's.
I adjusted the skimmer last night when it was in it crazy mode. I will watch it tonight to see if its skimming or not and post my results tommorrow.

Thanks for your time

Rich
 
Why is it a suitable pump listed on Andys' site? Plus I've seen the MR2 run on the Mag with dual becketts and worked just perfectly
 
pumps

pumps

<a href=showthread.php?s=&postid=8098480#post8098480 target=_blank>Originally posted</a> by chriscobb
Why is it a suitable pump listed on Andys' site? Plus I've seen the MR2 run on the Mag with dual becketts and worked just perfectly
Click to expand...
It is listed on Andy site because Andy sales pumps and skimmers the pumps that work well cost more so if he would list the pumps like Iwaki MD55RLT which cost $250.oo it would make the skimmers with the right pump cost more than a mag pump and skimmer.It is all a matter sales.
Ralph
 
chriscobb a mag will work but is u use a pressure pump u will be like WOW ! trust me i ran mag12 mag18 & a mag24 on my Mr-2 & when i bought an iwaki 70 my jaw droped.
 
would someone post a link to more info on the u tube modification. In particular i would like to know how you connect the pvc on the bulkhead inside of the skimmer. What size pvc is used? is the bulkhead slip or threaded on the inside? BTW I have one of the quad beckett models and its quite a long reach down in there. I may have to make the u tube stick up a little further than most just so i can use it to actually reach the bulkhead. Any additional advise is welcome.
 
Skimmer Upgrade

Skimmer Upgrade

Hi All!

I just ordered a 12" extension for my MR-2; and I have a question.

Am I going to have to raise my water level once I install this extension? This may sound really, really naive, but I've never had a skimmer I could "modify" like this, so it's my first time experiencing these kinda things.



I also realize it's only a "baseline", but if I do, any thoughts as to where I should begin my testing?

Thanks for all your help-

-Andy/Oldimpala
 
Re: Skimmer Upgrade

Re: Skimmer Upgrade

<a href=showthread.php?s=&postid=8108911#post8108911 target=_blank>Originally posted</a> by oldimpala
Hi All!

I just ordered a 12" extension for my MR-2; and I have a question.

Am I going to have to raise my water level once I install this extension? This may sound really, really naive, but I've never had a skimmer I could "modify" like this, so it's my first time experiencing these kinda things.



I also realize it's only a "baseline", but if I do, any thoughts as to where I should begin my testing?

Thanks for all your help-

-Andy/Oldimpala
Click to expand...

I didn't have to raise my water level when I bought my extension, but my skimmer is a recirc model. Not sure if it will affect yours or not. I would however suggest raising your becketts up.
 
My Mr2- with 12 inch extension & this is where i like my water level, i however like to run it wet

DSC09731.jpg
 
Have a MR-1 on the way. I was planning on using my Mag12 for the pump, but after reading some of these threads, I may need a pressure rated pump?
What is the most affordable pressure pump that would give good performance? I dont have alot of money to throw down. Or if someone has one that they want to sell, LMK.

Or is anyone using a Mag12 with good results. I really dont want to buy a new pump, but I may have to.

Any suggestions would be appreciated.
 
<a href=showthread.php?s=&postid=8113264#post8113264 target=_blank>Originally posted</a> by spider86
Have a MR-1 on the way. I was planning on using my Mag12 for the pump, but after reading some of these threads, I may need a pressure rated pump?
What is the most affordable pressure pump that would give good performance? I dont have alot of money to throw down. Or if someone has one that they want to sell, LMK.

Or is anyone using a Mag12 with good results. I really dont want to buy a new pump, but I may have to.

Any suggestions would be appreciated.
Click to expand...

I would order the GenX PCX-30 pump from Andy. He has them on sale for $89 right now.
 
What about a Little Giant 3-MDQX-SC for the MR-1. Its rated at 6.10 PSI. 1100 gph at 1ft. I can get one of these fairly cheap. How do you think it would compare to a Genx - 30?
 
Does anyone have the ozone port connected?

I'm thinking of using ozone, but it seems the way the connection is it will let too much air into the Beckett and interfere with the skimming.

Any conmments? Suggestions?
 
Status
Not open for further replies.

Similar threads

machodik
My Tunze 6095
Replies
9
Views
426
machodik
machodik
jay505
Is STARS still an active club
Replies
3
Views
875
griss
griss
Dr. Reef
Affordable Aquaria by Dr. Reefs Black Friday Sale
Replies
0
Views
188
Dr. Reef
Dr. Reef
Dr. Reef
XMAS Sale @ Dr. Reef's
Replies
0
Views
231
Dr. Reef
Dr. Reef
Dr. Reef
Dr. Reef's XMAS Sale
Replies
0
Views
456
Dr. Reef
Dr. Reef
Back
Top