New AquaController 3/3 Pro Firmware

<a href=showthread.php?s=&postid=14902936#post14902936 target=_blank>Originally posted</a> by RussM
Bravo Zulu to Curt and the rest of Neptune gang for formatting the XML properly and sensibly!
Click to expand...

Bravo Zulu is Navy lingo; it means congratulations on a job well done.
 
After I flashed to the latest firmware it says 3.40S with a date of 4F09, in the read me file it says it should read 3.40S with a date of 4E09 is this a typo in the read me?
 
<a href=showthread.php?s=&postid=14913623#post14913623 target=_blank>Originally posted</a> by harman
After I flashed to the latest firmware it says 3.40S with a date of 4F09, in the read me file it says it should read 3.40S with a date of 4E09 is this a typo in the read me?
Click to expand...

Yes
 
<a href=showthread.php?s=&postid=14912355#post14912355 target=_blank>Originally posted</a> by clp
Here the links to an updated version of the firmware. It will correct any potential lockup condition.

AC3:
www.neptunesys.com/aqua3_4F09_3.4.zip

AC3Pro:
www.neptunesys.com/aqua3pro_4F09_3.4.zip

Curt
Click to expand...

Is the web page update necessary along with the firmware (if we did it with E09)? Haven't had much luck in the past with that part on my Mac thru VMWare ;)

the other Curt
 
Curt,

Great Job! I have everything up and working but would love to know if this means you'll be porting the new graphs over to Aqua Notes too?

Thank You,
 
well this morning after running the update last night my logs have only been running for the last 2 hours ?? What happened between 9pm and 5am ?
 
<a href=showthread.php?s=&postid=14917763#post14917763 target=_blank>Originally posted</a> by rckrzy1
well this morning after running the update last night my logs have only been running for the last 2 hours ?? What happened between 9pm and 5am ?
Click to expand...

I'm wondering if it reboots itself or something, causing the log to reset. This happened to me the other day, albeit with the previous beta. All of a sudden I had no log data, and the controller had been running for about 3-4 days. I thought there was a power outage, but there wasn't one.
 
OK, found that my AC3 sent out a message last night for no apparent reason.

Apr 29 2009 05:04:11
Temp pH ORP
77.9 7.95 390
MHL is OFF Auto
VHO is OFF Auto
ACT is OFF Auto
LUN is OFF Auto
HET is OFF Auto
FAN is OFF Auto
WVL is ON Auto
WVR is OFF Auto
OZ3 is OFF Auto
H2O is OFF Auto
ALM is OFF Auto
FOV is OFF Auto
ALK is OFF Auto
Power Failed: None
Power Restored: None
 
<a href=showthread.php?s=&postid=14918048#post14918048 target=_blank>Originally posted</a> by jdeveaux
Found a problem. Mine is not logging data and when I select the graphs I get an error that data_default.txt is missing.
Click to expand...

that's what you see if you have no data , check your datalog .

Mine appears to be logging fine after it "reset" itself at 5am. And I do have mine on a UPS so there is no reason for a reset.
 
<a href=showthread.php?s=&postid=14918048#post14918048 target=_blank>Originally posted</a> by jdeveaux
Found a problem. Mine is not logging data and when I select the graphs I get an error that data_default.txt is missing.
Click to expand...

I bet you are running Aquanotes!!!

I thought there was a problem also but if you are running Aquanotes as a web service it downloads the data from the controller and erases the data on the controller. So there is really no data to import for the graphs you are talking about.

Hopefully, we will see an update for Aquanotes as it is a dinosaur. I feel I have wasted money buying the full version.
 
<a href=showthread.php?s=&postid=14918626#post14918626 target=_blank>Originally posted</a> by BillyBee
I bet you are running Aquanotes!!!

I thought there was a problem also but if you are running Aquanotes as a web service it downloads the data from the controller and erases the data on the controller. So there is really no data to import for the graphs you are talking about.

Hopefully, we will see an update for Aquanotes as it is a dinosaur. I feel I have wasted money buying the full version.
Click to expand...
Yup I'm running the full version of AquaNotes hence my earlier request that he port the graphs over to AquaNotes but I didn't realize it cleared my controllers logs.

Thank You for the information.
 
I'm pretty sure I have it set to not clear the logs already.

aquanotesconfig.jpg


A newer Aquanotes would be very nice.
 
The new version of AquaNotes for iPhone/iPod touch is now submitted to the AppStore, should be available soon. It requires this beta firmware.
 
can anyone with a Mac and VMWare (XP) do the webpage update? i got the firmware fine, but the webpage update sits on one of the graph files and never finishes! any special tricks? using AC3loader btw.
 
My firmware update worked okay, but not all of the pages uploaded correctly. Windows firewall is disabled. Any other suggestions? This is my ac3loader log:

AquaController Web Page Update Starting
Formatting Flash - Success
Sending aqua.css - Success
Sending index.htm - Success
Sending menu.htm - Success
Sending title.htm - Success
Sending netsetup.asp - Success
Sending settemp.xml - Success
Sending setorp.xml - Success
Sending setph.xml - Success
read to date: 20641848 bytes, reallocating buffer to 20642324
Sending arial.swf - Success
Sending swfobjec.js - Success
Sending rss.sht - Success
read to date: 20641848 bytes, reallocating buffer to 20642324
read to date: 20641848 bytes, reallocating buffer to 20642324
Sending fatgraph.swf - Success


Thanks,
John
 
You must log in or register to reply here.

Similar threads

M
ESP32 - AQma WiFi LED Control - 8 x LED Channels, 3 x SSR. FOR FREE!
Replies
2
Views
2K
danielch2008
D
M
New GHL Control Center and Firmware for GHL Doser 2
Replies
0
Views
1K
Matthias Gross
M
M
My Neptune and power bar are flashing yellow and the display is blank
Replies
8
Views
3K
kevinl
kevinl
T
Beta of new Apex firmware now available!
13 14 15
Replies
283
Views
31K
L8ndeb
L8ndeb
T
Apex Firmware Release Candidate Beta 4.20 CA12 Now Available
3 4 5
Replies
94
Views
12K
StevieK
StevieK
Back
Top