OT Motorhead's?

[61scout80]

I got a few heeps of parts.

My daily driver is a mkiv jetta tdi. Some 17" asa ls8 wheels, billstein shocks/struts and a muffler delete. It averages 48 mpg @ 75 mph.

My project is an 87 jeep cherokee. Rusty's long arm, deaver race leafs, non-disco d30 up front chysler 8.25 in the rear. RENIX 4.0 to an ax15 to an np231 w/ aa sye. Lunchbox lockers, skid plates, yadda yadda yadda all on some mtrs wrapped around 17" black steelies. still a work in progress. need a few odds and ends to get it back on and off road.

Turning wrenches has been my favorite hobby since i was 5 or 6. Did a few frame offs, motor swaps etc. my favorite was the 1983 regal ttype my dad and I restored. Sure do miss that car.

 

[NaClH20NMYVEIN]

MKIV Jetta???? An MKIV is a 93-98 Supra. Fill me in.

 

[Turbovr3six]

MKIV Jetta???? An MKIV is a 93-98 Supra. Fill me in.

Its the body style. My Jetta is a MKIII, so MKIV is the newer model. They had the MKV's for a while, but not they just dropped the new style agian so its up to 6 i guess.

 

[61scout80]

MKIV Jetta???? An MKIV is a 93-98 Supra. Fill me in.

a few manufacturers use the "mark number" designation. The mkiv jetta is 99-2004 i believe. We also have a mkv rabbit.

 

[OwenInAZ]

OK OK Fine. You twisted my arm

1965 Dodge Polara C body. 383 V8 automatic. I'm the third owner, but the first was my great grandfather in Tucson. Then my dad and I fixed her up from the ground up. Her name is Helga.

 

[OwenInAZ]

I like MoPar

If you're going to do muscle, do it right Nice cars.

Helga's guts aren't as pretty, but they get the job done.

 

[scubamaniac]

nice rides one and all does anyone have an interest in programing/hacking the computer systems? I am looking for the carshark or openotto software..

 

[UberNoober]

nice rides one and all does anyone have an interest in programing/hacking the computer systems? I am looking for the carshark or openotto software..

Have u tried bit torrents?

 

[30reef]

Calvin, that is one nice ride you have, a Porsche has always been a car that I would like to own one of these days. I really dig on the mid 70's 911 turbos, but restoring one to factory specifications (and my specifications) would end up costing more than a new one. Some of the cars that Porsche Classic churns out are spectacular, in terms of quality AND price. I especially appreciate a restoration that is 100% OEM, not reproduction or aftermarket, of course sometimes that is not possible. My wife and are now of an age where we could get reasonable insurance on a German sports car. Thanks for the inspiration.

You guys really have some cool cars/toys. I wouldn't mind something in the garage to tool with now and then, that is if I could ever get out of the garden long enough to do it. By the way, I tool with cars daily, I work for Chevrolet.

Peace.

 

[scubamaniac]

Last time I tried torrents for these software I got addware virus and who knows what else. I hope to find it from someone who has downloaded it and tried it and it is workable and clean....

 

[Patrick_rogn]

2007 Toyota Tacoma
TRD sport
6 speed standard trans
4x4

1989 Suzuki LT500R two stroke
fmf pipe
aftermarket race carb
this thing is FAST.

 

[Robb_In_AZ]

OK OK Fine. You twisted my arm

1965 Dodge Polara C body. 383 V8 automatic. I'm the third owner, but the first was my great grandfather in Tucson. Then my dad and I fixed her up from the ground up. Her name is Helga.

Red interior on a white paintjob, nice ! Very clean and very Classic car!

 

[OwenInAZ]

Thanks it's actually more of a cream color, but it's all the original color scheme, except for the HOT PINK vinyl interior trim edging we couldn't find. I have done weddings and stuff for my friends, people like to get driven off in a boat!

She needs a new carb, because one of the jets is hopelessly clogged. When I goose the throttle it bogs out from lack of fuel. Also she drains the battery; my suspicion is a stuck starter solenoid. Once I graduate in December I'm going to rectify those two problems.

 

[nate487]

2001 v6 mustang overworked

18x9.5 fronts on 275/45/18
18x11.5 rears on 305/45/18

bbk cold ram air intake
engle cam
bbk throttle body
fordmotorsports injectors
superchip
bbk long tube headers
flowmaster 2.5 inch dual exhaust with h pipe
cobra tranny and rear end
dual stage nitrous 150 shot

not running as strong as it used to (100,000 miles now) guess its time to upgrade

 

[OwenInAZ]

2001 v6 mustang overworked

18x9.5 fronts on 275/45/18
18x11.5 rears on 305/45/18

bbk cold ram air intake
engle cam
bbk throttle body
fordmotorsports injectors
superchip
bbk long tube headers
flowmaster 2.5 inch dual exhaust with h pipe
cobra tranny and rear end
dual stage nitrous 150 shot

not running as strong as it used to (100,000 miles now) guess its time to upgrade

You should upgrade, American muscle should always have at least 8 cylinders Nice looking car though!

 

[azsrt]

Owen, love your C-bod! reminds me a lot of my former 66 Sport Fury. Was my favorite freeway cruiser of all time.

 

[Turbovr3six]

Today is a very, very, very sad day for me. I'm selling my beloved Jetta that I've owned since highschool. Not easy to do since I put WAY to much money into it and I'm only getting a fraction of it back. I know cars are a bad investment, but I'm attached to this one. :sad1:

But on the up side, I'm going to buy a CRF450R! I'll probably kill myself on it, but it sure will be a fun bike!! :bounce3:

Also my girl will now be able to get her 08 Passat 2.0T in the garage! It's had no reason to be in the garage as of yet, but she wants rims for x-mas so it will need to be put inside. She wants Bentley Continental GT wheels, but there freakin EXPENSIVE! Instead a buddy of mine back east might ship out his Benzo Monoblock wheels.

Sneak Peek, Edited for language:

 

[zx6r]

Better be coilovers instead of bags, seems like the VW guys pansy out about that stuff

 

[rafajara1985]

crf450? boo

2-stroke is the only way to go.

 

[Turbovr3six]

CRF450R and CR125 in the garage as on now!