Simu LED Spots

[jpduton]

Thanks a lot man. I have them installed now, so I'll start playing around with the settings to get it to what I like.

Once I have mine the way I like it, I'll post some screen shots of mine.

 

[jpduton]

Anyone have any ideas as to why all of a sudden (well for the last couple days) my LED Simu Spot thunderstorms have stopped activating, even when I manually start they don't activate?

 

[kidney514]

It may be an oversight, but just make that you are connected to the device when you try to start a manual storm, I have done that mistake a few times already, tough i was connected and wasn't. Disconnect and connect then try to start the manual storm again and let me know....

 

[jpduton]

When I manually start it my tunze respond but not the simu spots

 

[AQD_ottawa]

You are trying to manually start the wrong channel there is no other explanation.

 

[jpduton]

I'm referring to the manual storm button on the thunderstorm settings on the software not the controller. None of my programmed thunderstorms are activating either. I have it set for four storms none of which actually start.

 

[jpduton]

What else could be the problem?

 

[kidney514]

What L socket are your spots on?

 

[jpduton]

L1/L2, I have my tunze on L3 and my other tunze will be on L4 nce my splitter and tunze2 cable comes in.

 

[kidney514]

In the menu 1-10V what is set for L1/L2. I suspect that they are "always Off"

 

[jpduton]

 

[kidney514]

cool, take snapshot off ILL1 & ILL2 and Thunderstorm and simu

 

[jpduton]

Well, I figured out how to post these screenshots now
Here's the Thunderstorm settings:

 

[jpduton]

Here's Ill 1

Here's L2

 

[kidney514]

Where is simu?

 

[jpduton]

Well I take it here's my problem: No days selected.

I'm going to owe you a few beers.

 

[jpduton]

I updated:

 

[kidney514]

It wasn't the Rainy days your problem, everything looks fine....
instead of .08 put 1.0 in the min and try it again, if that fails I would suggest a complete reboot off your profilux device. Unplug power for 30 sec, replug and try again.....

 

[jpduton]

Now that I think about it, even if days weren't selected the manual start should have worked. I just up the min V to 1.

I had a reboot earlier today.

I just tried another Manual start and still nothing

 

[kidney514]

Can you program them under the 1-10V menu? It should flash if you are successful!