Roger,
I am still debating 6080s vs. 6100s with controllers. Obviously 4 6080s would be considerably cheaper.
Currently I am using 4X1200gph external powerheads one in each corner on a wavemaker. It turns left side on for a 40minutes then alternate the right side for 40 minutes.
I am thinking I could do very similiar with 4X6080s. Initially thinking on/off once a day with 14 hours on and 10 hours off. So a few hours a day all 4 would be running.
A buddy has an instruction manual and it recommends using Tunze timers no frequently than once an hour. However, on the Tunze web site it says the timers are for german plugs only.
Do they make a timer for US plugs. If not, do you recommend a timer. In a previous thread you mention it should be a soft start but not for sure how to tell or where to get one if Tunze does not make one for the US.
I am still debating 6080s vs. 6100s with controllers. Obviously 4 6080s would be considerably cheaper.
Currently I am using 4X1200gph external powerheads one in each corner on a wavemaker. It turns left side on for a 40minutes then alternate the right side for 40 minutes.
I am thinking I could do very similiar with 4X6080s. Initially thinking on/off once a day with 14 hours on and 10 hours off. So a few hours a day all 4 would be running.
A buddy has an instruction manual and it recommends using Tunze timers no frequently than once an hour. However, on the Tunze web site it says the timers are for german plugs only.
Do they make a timer for US plugs. If not, do you recommend a timer. In a previous thread you mention it should be a soft start but not for sure how to tell or where to get one if Tunze does not make one for the US.