The Reef Central Corner Club Thread
- Thread starter Michael
- Start date
myram
#347, 19 years
myram
#347, 19 years
Anyone know for sure the thickness of the side panels in a 54 corner?
I don't have good access to my back corner to get a good measurement.
I'm thinking it's 3/8" thick glass, but I want to make sure. Might get a MP40 for flow, and need to know if it will fit in my 2.75" of space between the tank and wall.
I don't have good access to my back corner to get a good measurement.
I'm thinking it's 3/8" thick glass, but I want to make sure. Might get a MP40 for flow, and need to know if it will fit in my 2.75" of space between the tank and wall.
E fishn C
New member
I have access to my 54 tank. I can post measurments tonight. How do I measure it. Perhaps its best to google manufacture, they must have it.
myram
#347, 19 years
I googled it, and nothing came up. One person said 5/8", but that is way too thick.
I'm going to look tonight when I get home and see if I can measure, but it's tight in the corner.
Where the 2 side pieces come together in the back, you should see a raw edge on one of them. That will be the best measurement spot.
If you mean trigon 190/ 54 gallon corner
Here is the site http://www.juwel-aquarium.de
I thought it was 1.2 cm or 12mm front panel
Here is the site http://www.juwel-aquarium.de
I thought it was 1.2 cm or 12mm front panel
myram
#347, 19 years
Anyone using a Radion over a 54 corner?
Always looking at upgrades, and lighting is on my short list.
I'm not sure a single Radion (gen 2 or 3) would completely cover the area, I would put the 120 lens kit on it for sure. I could mount it about 8-9" off the surface, that's the max inside my canopy.
Always looking at upgrades, and lighting is on my short list.
I'm not sure a single Radion (gen 2 or 3) would completely cover the area, I would put the 120 lens kit on it for sure. I could mount it about 8-9" off the surface, that's the max inside my canopy.
m 1 20000k off
E fishn C
New member
Edge measurement
Edge measurement
Checked on glass last night. I have a black plastic trim reinforcing my entire tank at all edges except the front bow. What I can see this measures at a 3/16" edge.
Edge measurement
Checked on glass last night. I have a black plastic trim reinforcing my entire tank at all edges except the front bow. What I can see this measures at a 3/16" edge.
myram
#347, 19 years
I searched this thread, and didn't see anyone actually using a Radion on a corner tank.
I'm tempted by a Gen 2 Pro Radion, I can put the 120 optics on it, and mount it about 8-9" off the water. It will cover the entire tank, and I hear the controller is top notch on it.
It's either that, or I'm thinking about a Reefbreeder Photon 24. But the controller is a lot less refined, with less features.
I'm tempted by a Gen 2 Pro Radion, I can put the 120 optics on it, and mount it about 8-9" off the water. It will cover the entire tank, and I hear the controller is top notch on it.
It's either that, or I'm thinking about a Reefbreeder Photon 24. But the controller is a lot less refined, with less features.
