Once you respond to a thread you're subscribed.
ATI Powermodule Hybrid Club
- Thread starter rodneyri
- Start date
Once you respond to a thread you're subscribed.
So my light is still 'broken'
When running, (especially prevalent during the day preview mode), the LED clusters will just turn off and on in random orders and at random times, almost like a flicker. Also when I re-upload the program to the light, the T5s (especially the 4 outer ones) will turn on even when set to 0%?
I've performed a factory reset and re-uploaded my program to the light as recommended by the supplier - but it's still broken.
Any help / advice other than send it back?
Cheers
Anthony
When running, (especially prevalent during the day preview mode), the LED clusters will just turn off and on in random orders and at random times, almost like a flicker. Also when I re-upload the program to the light, the T5s (especially the 4 outer ones) will turn on even when set to 0%?
I've performed a factory reset and re-uploaded my program to the light as recommended by the supplier - but it's still broken.
Any help / advice other than send it back?
Cheers
Anthony
contact ATI support, you likely have a defective controller box like I did
I will do, cheers.
Here's my graph right now, running in the T5s at 100% to burn them in, but on a very limited photoperiod so as to not shock the corals, having swapped from 2 x Kessil A360WEs to this unit
Hybrid graph by DEAF N1NJA, on FlickrAnd a quick photo of one of my SSC which looks so much better under the Hybrid
Strawberry Shortcake by DEAF N1NJA, on Flickr
MikeC120
New member
It is my understanding that burning in bulds requires 50 hours of continuously on at 100%
rower4fish
New member
Hi,
I am sorry if this has already been answered, but I am having trouble with the programming software. I just bought an ati powermodule. It is on with all bulbs working. I have it connected to my computer and have the ati software installed on my computer. However, only the USB indicator in the upper right corner of the screen is on - not the lamp indicator.
Does anyone have advice for me? My sps like the new light, but I am not sure what the mfg preset is.
I did notice above that someone was asking about windows 10, I am running windows 10. Does that matter?
Thank you in advance for any comments.
I am sorry if this has already been answered, but I am having trouble with the programming software. I just bought an ati powermodule. It is on with all bulbs working. I have it connected to my computer and have the ati software installed on my computer. However, only the USB indicator in the upper right corner of the screen is on - not the lamp indicator.
Does anyone have advice for me? My sps like the new light, but I am not sure what the mfg preset is.
I did notice above that someone was asking about windows 10, I am running windows 10. Does that matter?
Thank you in advance for any comments.
Last edited:
rower4fish
New member
Well, I just hooked up an old computer that has windows 8 and I now have both lamps!
Day 3 here of a4 x led 8 x 80 watts and got a confirmation that windows 10 has got no compatibility with the unit. I went to buy a laptop after I was told that it was fine as I am a Mac user.. they send me the link for a Beta version of software, but it did not work.. manually programming the lights.. awesome kit.. still not sure about settings but it's so powerful it's terrifying nice
Redrosetuscan
New member
I disconnected my light today to change a tube and now when reconnected the led doesn't work, the display says the led are 6320 degrees! The led fans are not on either
How do I do a reset?
How do I do a reset?
i am not sure what exact weight of the unit , but i can tell you its heavy...maybe call ATI USA for correct number.. I would say more then 40lbs for sure..
Noticed a few of my SPS are losing their colour in patches - and wondering if my photoperiod is too short on my ATI Hybrid.
It's an 8 bulb 24" model over a 24" x 18" x 18" 30 ish gallon tank - it's replaced 2 x Kessil A360WEs and has been on the tank around 12 days so far.
The Kessils were running a 13 hour photoperiod with a 4 hour peak period maxing out @ 65% intensity (comparing apples and oranges I know).
Here is my graph for the ATI Hybrid :
Hybrid graph by DEAF N1NJA, on Flickr
I also realise it could be many things with regards SPS colour loss (it's not bleaching) such as nutrient levels, parameter swings etc.
It's an 8 bulb 24" model over a 24" x 18" x 18" 30 ish gallon tank - it's replaced 2 x Kessil A360WEs and has been on the tank around 12 days so far.
The Kessils were running a 13 hour photoperiod with a 4 hour peak period maxing out @ 65% intensity (comparing apples and oranges I know).
Here is my graph for the ATI Hybrid :
Hybrid graph by DEAF N1NJA, on FlickrI also realise it could be many things with regards SPS colour loss (it's not bleaching) such as nutrient levels, parameter swings etc.
sahin
Ultimate Reefer
Noticed a few of my SPS are losing their colour in patches - and wondering if my photoperiod is too short on my ATI Hybrid.
It's an 8 bulb 24" model over a 24" x 18" x 18" 30 ish gallon tank - it's replaced 2 x Kessil A360WEs and has been on the tank around 12 days so far.
The Kessils were running a 13 hour photoperiod with a 4 hour peak period maxing out @ 65% intensity (comparing apples and oranges I know).
Here is my graph for the ATI Hybrid :
I also realise it could be many things with regards SPS colour loss (it's not bleaching) such as nutrient levels, parameter swings etc.
Your main light period is on the short side. Go ahead and extend the light period. However, have you checked for pests? Are all SPS including monti's stylosphora/hysterix etc all affected? Or just Acropora?
I've actually been told that maxing them out at 100% was giving them TOO much light, hence the patchiness on the bases etc?
Other parameters are stable now i'm dosing using the balling lite method with Fauna Marin trace additives.
I checked last night using a red light and couldn't see any AEFW?
As above i've been told that I needed to halve the intensity and actually reduce the photoperiod - this is the updated program - I don't know what you guys think? Seems on the low side but I was thinking of increasing the intensity a touch each week, along with a gradual increase of both T5 channels photoperiod.
Acclimation by DEAF N1NJA, on FlickrSimilar threads
