drummereef's 180g in-wall build
- Thread starter drummereef
- Start date
steelersfan
Member
Very nice and clean setup!!! :thumbsup:
Good luck with mounting your Vortech drivers.
Good luck with mounting your Vortech drivers.
drummereef
Team RC
Thank you hypernesia.
In the video the Vortechs are at opposite ends (sides) of the tank facing in towards each other. I just couldn't believe how fast they would make a wave. I'm still a little scared of it though. Have bad thoughts it will blow my tank apart. 
Probably just from the disclaimer in the manual that's freaking me out about it. :lol:
drummereef
Team RC
Sorry, been at work all day.
Yes, they were in sync mode. I get now how to sync and anti-sync but is there an easy way to take my second Vortech out of slave mode without resetting the memory?The only thing about the Vortechs that's a little frustrating is the manual. It's very descriptive on what they can do but doesn't go into detail on what buttons to push to do it. Is there a guide that you know of that details all the settings of the MP40's?
drummereef
Team RC
Nah, it was the Vortechs doing that.
The water was going well below the overflow at either ends but probably was still keeping a siphon. I need to investigate that further though. When I was running it I had the return pump off so some water drained out of the display, otherwise it would have probably pushed the wave over the sides. I probably won't be using the wave much though. I kind of view it as a novelty setting at this point. Cool to show friends though. And I'm still a little freaked out about it blowing my tank apart. 
<a href=showthread.php?s=&postid=15206094#post15206094 target=_blank>Originally posted</a> by drummereef
Sorry, been at work all day.
The only thing about the Vortechs that's a little frustrating is the manual. It's very descriptive on what they can do but doesn't go into detail on what buttons to push to do it. Is there a guide that you know of that details all the settings of the MP40's?
hehe i'm with you on that... manual is horrible, it took me about a week to learn how to play with vortech...
<a href=showthread.php?s=&postid=15206156#post15206156 target=_blank>Originally posted</a> by drummereef
Nah, it was the Vortechs doing that.
hey brett you should put a check valve on your return line... that's what i did and it's run really good... you won't have any problem.. check my return line pictues you see what i'm talking about it..
blennymower
New member
What does the disclaimer say?
drummereef
Team RC
It says... and I quote
"The generation of waves within your aquarium places additional stress on the aquarium glass and joints. Not all aquarium tanks are designed to withstand this stress, and failure of the glass and/or joints could result. You are encouraged, before generating waves, to consult with your aquarium tank manufacturer to determine if the tank construction is adequate to withstand the additional stress generated by the wave motion. You are also encouraged to assure that your aquarium stand or furniture is adequately stable to withstand the additional stress resulting from wave generation.
EcoTech Marine DISCLAIMS AND WILL NOT BE LIABLE FOR, damage to the aquarium tanks or their surroundings, water damage, or any other consequential damages resulting from wave generation. MAKE WAVES AT YOUR OWN RISK."
drummereef
Team RC
Oh yeah, that's what I've been messing around with. Seems like a lot of people use this setting and are happy with it. Is there an easy way to take the pumps out of Master/Slave mode without resetting the memory?
drummereef
Team RC
Just posted in the EcoTech Forum. I'll let you know what they say.
drummereef
Team RC
<a href=showthread.php?s=&postid=15208212#post15208212 target=_blank>Originally posted</a> by mpoletti
Very Nice Brett
Haha thanks Mark. What... you don't think it's done yet?
J/K
drummereef
Team RC
<a href=showthread.php?s=&postid=15208790#post15208790 target=_blank>Originally posted</a> by jmadison
I know I may be getting ahead of your project here, but when you do that film for the back glass take some extra pics please
Will do. I need to start looking for some Coroplast around here soon. I know most sign stores use it to make signs but don't know if they sell whole sheets. Guess I'll start calling around.
<a href=showthread.php?s=&postid=15209588#post15209588 target=_blank>Originally posted</a> by drummereef
Haha thanks Mark. What... you don't think it's done yet?
Now that I have put reef discussion on MY RC page, I am getting caught up on a lot of threads over here, so let the bantering continue
Similar threads
