jimmy007
Member
Alan is this the same?
http://www.ebay.com/itm/Swagelok-Ma...82049a:m:mfSnbHHUp59zbBLACBcXmFQ#ht_768wt_899
http://www.ebay.com/itm/Swagelok-Ma...82049a:m:mfSnbHHUp59zbBLACBcXmFQ#ht_768wt_899
How to build a CO2 regulator for your calcium reactor.
- Thread starter alanle
- Start date
SchnitzelReef
Active member
All my fittings came in. I'll update as soon as I got it put together
Ask the seller to take a pix with the blue cap off.
The gauges have a VCR male connector so the inlet and outlet are both VCR as well. Another way is by looking at the pdf sheet.
http://www.parker.com/literature/Veriflo/Veriflo - pdf files/25000141_IR6000.pdf
All my fittings came in. I'll update as soon as I got it put together
High end stuff.
jimmy007
Member
How to build a CO2 regulator for your calcium reactor.
No it's not going to fit. Search for 1/4 vcr x 1/4 npt
Picture from seller.
No it's not going to fit. Search for 1/4 vcr x 1/4 npt
jimmy007
Member
Do you have one for sell? Other ebay seller want 44 buck for 2.
How can you tell?
By looking at the connector on the gauges or you can look at the reg model #, most likely there's an fs in it.
So with a VCR fitting is no Teflon tape required? Wouldn't Teflon deal it up if we don't use a VCR fitting?
amt68
Member
Jimmy, would this fitting work.
http://m.ebay.com/itm/New-Swagelok-...nnector-SS-4-VCR-1-4-/191403778739?nav=SEARCH
jimmy007
Member
Don't know plus it sold my luck.
jimmy007
Member
Alan can I add this piece to my current CGA?
http://www.ebay.com/itm/Swagelok-SS...ody-SS-4-VCR-7-4-/121403611696?#ht_469wt_1136
Or do I still have to get the CGA you recommended even if I add this part?
http://www.ebay.com/itm/Swagelok-SS...ody-SS-4-VCR-7-4-/121403611696?#ht_469wt_1136
Or do I still have to get the CGA you recommended even if I add this part?
