NOW IN STOCK: AquaMaxx ConeS CO-2 and CO-3 Protein Skimmers

[bigzman]

Hello,

I have been on the notify list for cone3 or EM300. Is the only way to get the is to wait weeks? I am scared to place order and wait months. I am ready to buy today. I have looked at other options like reef octopus prime 200 int but specs seem far better on the aquamaxx. On another note how is their support? I have seen often when a company can't ramp up to meet demand often struggle on to provide support.

Thanks,
Z

 

[MarineDepot]

NOW IN STOCK: AquaMaxx ConeS CO-2 and CO-3 Protein Skimmers

Hello,

I have been on the notify list for cone3 or EM300. Is the only way to get the is to wait weeks? I am scared to place order and wait months. I am ready to buy today. I have looked at other options like reef octopus prime 200 int but specs seem far better on the aquamaxx. On another note how is their support? I have seen often when a company can't ramp up to meet demand often struggle on to provide support.

Thanks,
Z

With such a high demand for the products, unfortunately many of the skimmers have a pretty hefty wait time. At this point, placing the backorder with Marine Depot is your best bet to ensure one of the first available skimmers is shipped to you.

From our experience AquaMaxx support has always been prompt and thorough. If you have questions, you can get in touch with them directly via email info@aquamaxxaquariums.com.

 

[bigzman]

Thank you.

 

[disclosure11]

I placed an order for the CO-2 last week when the backorder was listed as 4-6 weeks, but the site now shows 3-6 months. Is there a way to know (ballpark) when my specific order will be fullfilled? Order #101622681 . Thanks!

 

[MarineDepot]

AquaMaxx ConeS CO-2 Protein Skimmer

AquaMaxx ConeS CO-2 Protein Skimmer

I placed an order for the CO-2 last week when the backorder was listed as 4-6 weeks, but the site now shows 3-6 months. Is there a way to know (ballpark) when my specific order will be fullfilled? Order #101622681 . Thanks!

Hi disclosure11. Thank you very much for shopping with Marine Depot!

We will be able to fulfill all AquaMaxx CO-2 Protein Skimmer backorders when our next shipment arrives, which is estimated to be delivered to our California warehouse not next week, but the week after.

We were hoping it would be next week, and that is still possible. Basically the shipment arrives at the port in Long Beach, CA next week... but it often takes a few days to clear the dock and make its way here where we'll inspect the contents and place the items into inventory.

I hope this is a more favorable reply than you were expecting! :celeb1:

Let me know if you have any further questions. I'd love to see a photo once you've got the skimmer up and running.

Jeff @ MD

 

[disclosure11]

thanks!

 

[Dave & Monica]

I hope this goes for the CO-3s as well. Mine has been on back order since April 17th. Patiently waiting.

 

[africangrey]

Hi Jeff,
Spoke to Guito that the shipment should arrive by the end of month, would you know the updated status of exactly when they will arrive to your facility for distribution. I am the 9th on the list for the CO-1, thx.
Spencer

 

[MarineDepot]

Hi Jeff,
Spoke to Guito that the shipment should arrive by the end of month, would you know the updated status of exactly when they will arrive to your facility for distribution. I am the 9th on the list for the CO-1, thx.
Spencer

We've already begun fulfilling backorders. Have you received a shipment confirmation? If not, you're welcome to supply me with your order # here or via PM and I can check on it for you. Thanks!

 

[MarineDepot]

AquaMaxx ConeS CO-3 In-Sump Protein Skimmer

AquaMaxx ConeS CO-3 In-Sump Protein Skimmer

I hope this goes for the CO-3s as well. Mine has been on back order since April 17th. Patiently waiting.

Thank you for your patience! They are in stock now so you should be receiving a shipping confirmation soon if you haven't already.

 

[wcharon]

What is the best water depth for the EM-200??? I know it is a range between 8 and 10" but what is the ideal???

Thanks in advance...

The CO-1 does run better at a water depth of 9.5" because of the raised outlet pipe. This 9.5" water depth will prevent micro-bubbles and excess splashing noise. The EM200 may be a better choice for this reason as it will run perfect at an 8" water depth.

 

[MarineDepot]

AquaMaxx EcoMaxx EM200 In-Sump Protein Skimmer

AquaMaxx EcoMaxx EM200 In-Sump Protein Skimmer

What is the best water depth for the EM-200??? I know it is a range between 8 and 10" but what is the ideal???

Thanks in advance...

You don't want the skimmer in more than 10" of water; you should see optimal results above 8" and under 10".

 

[wcharon]

Thanks. Will give that a try.

You don't want the skimmer in more than 10" of water; you should see optimal results above 8" and under 10".

 

[s2nhle]

I have 90g SPS with 10 fish. which skimmer is best for my system? Thanks,

 

[MarineDepot]

Hi s2nhile,

Are they small fish or medium/large fish. It sounds like a pretty heavy bioload. If they are mostly small fish, you can definitely get by with the CO-1. However, if they are medium/large fish, we would recommend either the EM-200 or ConeS CO-2.

 

[Zer0.]

Hi s2nhile,

Are they small fish or medium/large fish. It sounds like a pretty heavy bioload. If they are mostly small fish, you can definitely get by with the CO-1. However, if they are medium/large fish, we would recommend either the EM-200 or ConeS CO-2.

Im looking at either the EM200 or ConeS CO-2, do you recommend one over the other? Also any idea when I could get my hands on one if I order today?

Thank you!

 

[wyattroa]

Is the eta really 3-6 month for a replacement base for the cone-s1?

 

[Markemark]

I got my new aquamaxx cone co-3 and going to be having a custom sump made and was wondering what is the best water height for this skimmer to work in. Any input would be great.

Thanks

 

[Aquamaxx]

Hi Zer0., Both are great skimmers. The ConeS CO-2 would slightly better if you have enough space to accommodate the skimmer. The larger reaction chamber and the cone diffusers will give you more performance. Both are currently sold out. We would recommend calling to pre-order you skimmer as they are fulfilled on a first-come-first-serve basis.

Hi Wyattroa, I think we were able to get one to you already. If you need anything else, please let us know.

HI Markemark, The 'best' height depends on the specific water parameters. Anything between 8"-10" usually works just fine for most. As long as you are within that water level, you can simply adjust the outlet pipe to control the water level inside the skimmer.

 

[Zer0.]

Hi Zer0., Both are great skimmers. The ConeS CO-2 would slightly better if you have enough space to accommodate the skimmer. The larger reaction chamber and the cone diffusers will give you more performance.

In the specs both have the "chamber diameter" listed as 6".

Is this not the case?

Thanks for the reply.