NOW IN STOCK: AquaMaxx ConeS CO-2 and CO-3 Protein Skimmers

MarineDepot said:
IMO, the EM300 would be a great choice. You get a nice large body, with the Sicce 3.0 pump, slim profile and will definitely handle your aquarium even with a heavy stocking level. When compared to the CO-2 which is equally priced, the EM300 is simply a stronger skimmer.

If you really like fancy looking products, the CO-3 would be my recommendation for the CONE-S but you are going to pay a bit more for the same power as the EM300.

-Robert F.
Click to expand...

Ordered the EM300 from you guys today, and I got my free t-shirt
 
uploadfromtaptalk1411445134598.jpg

Just like sharing these for some reason. This is after 3 days.
 
i have a 350g plus 100g sump and want to have about 50 fishes (very heavy load) what do you recomend? thank you
 
Hi Luamada,

Quite an exciting project you are working on! Either the Cone 5 (UJ00165) that is currently on sale, or the EM500 (UJ00163) would be excellent choices.

If you have any other questions, please let us know.
 
AquaMaxx CO-1

AquaMaxx CO-1

myram said:
Any date on when the CO-1 will be back in stock?
Click to expand...

The ETA currently listed in our purchase order system is 11/14/14. We have a ton on order and not too many backorders so we should have plenty of stock for customers once it arrives here (assuming we receive a full shipment from AquaMaxx).
 
Here's an odd question.

I have an EM200 order on backorder with you guys until you get in new stock. I happened to be looking at the EM200 page last night, and it said that it was actually in stock, so I assumed it would maybe be shipped to me today (next business day). There was also a little banner beneath stating there would be a 10% off Aquamaxx sale until the end of the month.

I didn't want to get my hopes up, so I am assuming that was just a glitch. Is that correct?
 
Em200

Em200

Fade2White12 said:
Here's an odd question.

I have an EM200 order on backorder with you guys until you get in new stock. I happened to be looking at the EM200 page last night, and it said that it was actually in stock, so I assumed it would maybe be shipped to me today (next business day). There was also a little banner beneath stating there would be a 10% off Aquamaxx sale until the end of the month.

I didn't want to get my hopes up, so I am assuming that was just a glitch. Is that correct?
Click to expand...

Good morning! Thank you so much for shopping with us.

We do have a 10% off AquaMaxx coupon (code: AQUAMAXX). The sale began yesterday afternoon and will continue until the end of the month. The coupon can only be applied to in-stock AquaMaxx products and items currently not on sale. We only have a few backorders, all recent. If you placed your order within the past 14 days, give us a call today. We'd be happy to credit your MD account for the difference.

Unfortunately the EM200 is still out of stock. I just selected it from the drop-down on the EcoMaxx product page and it still reads out of stock for me. Does it on your side? I show in our purchase order system we have orders with estimated times of arrival in mid-November, late December and through the New Year.

http://www.marinedepot.com/ps_ViewItem.aspx?idproduct=UJ00161&child=UJ00161
 
MarineDepot said:
Good morning! Thank you so much for shopping with us.

We do have a 10% off AquaMaxx coupon (code: AQUAMAXX). The sale began yesterday afternoon and will continue until the end of the month. The coupon can only be applied to in-stock AquaMaxx products and items currently not on sale. We only have a few backorders, all recent. If you placed your order within the past 14 days, give us a call today. We'd be happy to credit your MD account for the difference.

Unfortunately the EM200 is still out of stock. I just selected it from the drop-down on the EcoMaxx product page and it still reads out of stock for me. Does it on your side? I show in our purchase order system we have orders with estimated times of arrival in mid-November, late December and through the New Year.

http://www.marinedepot.com/ps_ViewItem.aspx?idproduct=UJ00161&child=UJ00161
Click to expand...

Thank you for the reply! I placed my original order on 10/9, so I'll go ahead and contact you guys about a credit for the difference. I appreciate it!

In regards to the EM200, it also shows out of stock on my end. However, it did not last night. I verified on both my mobile device and laptop. When I checked again this morning, it said it was OOS again. I'll just chalk to up to a little hiccup, but I just wanted to inquire in case you got new stock sooner than anticipated!

Thanks!
 
EM200 skimmer

EM200 skimmer

Fade2White12 said:
Thank you for the reply! I placed my original order on 10/9, so I'll go ahead and contact you guys about a credit for the difference. I appreciate it!

In regards to the EM200, it also shows out of stock on my end. However, it did not last night. I verified on both my mobile device and laptop. When I checked again this morning, it said it was OOS again. I'll just chalk to up to a little hiccup, but I just wanted to inquire in case you got new stock sooner than anticipated!

Thanks!
Click to expand...

You can let the representative you speak with know you chatted with Jeff on Reef Central when you call in. Sorry about the site giving you issues. I see no indication here internally why the stock status would have temporarily changed (like a few recent orders being fulfilled could indicate we received a partial shipment). We're so close to Halloween, hopefully more mysterious things don't begin occurring.

angler_fish_pumpkin_by_kudalyn-d31qg48.jpg
 
Has there been any update on the arrival of the AquaMaxx shipment? Yesterday it had an ETA of only a few days, and now it's back to 2-3 weeks.
 
Hi Fade2White12, we are hoping to receive the shipment soon. However, there is currently a bit of a backlog at the Long Beach port so the shipment may take a little longer to get to us than our original estimate.

We apologize for any inconveniences caused.
 
I tried in another thread, but perhaps I can get the answer here...

so I'm looking at the ConeS CO-1 on MD, and it says that footprint is 6.3"x8.7"... but as I look at the pictures it looks like the legs make a perfect square around the sicce pump...

is the additional 2.4" taking into account the cylinder drain pipe? is 6.3"x8.7" the actual footprint? is the actual footprint 6.3"x6.3"? if not, can you please give me the actual footprint?

I'm trying to determine if I have a large enough space in my sump for the CO-1...
 
Hi pREEFERED, Yes, the dimensions does take into account the drain pipe.The actual parts that would touch the floor of your sump is 6.3" x 6.3": however, you do need that extra 2.4" of space to accommodate the drain pipe.

If you have any other questions, please let us know.
 
Great! I guess my next questions would be is it still looking like the skimmer will be available by the end of the month?
 
pREEFERED said:
Great! I guess my next questions would be is it still looking like the skimmer will be available by the end of the month?
Click to expand...

We are hoping to receive the shipment soon. There is currently a bit of a backlog at the Long Beach port so the shipment may take a little longer to get to us than our original estimate. We have our fingers crossed!
 
Hello,

Can you tell me should I use the co-2 or co-3 for a 150g display, 40g breeder sump, heavily stocked mixed reef?

Thanks for your help!
 
Last edited:
One of our associates uses the CO-3 on his heavily stocked 150-gallon. It is a bit of an over-kill, but nonetheless it does an amazing job.

If you have the space available in your sump and are looking to have a heavy bioload, we would recommend to go ahead and upgrade to the larger CO-3.
 
MarineDepot said:
One of our associates uses the CO-3 on his heavily stocked 150-gallon. It is a bit of an over-kill, but nonetheless it does an amazing job.

If you have the space available in your sump and are looking to have a heavy bioload, we would recommend to go ahead and upgrade to the larger CO-3.
Click to expand...



Thanks for your help! Turns out I couldn't fit the CO-3 so CO-2 is on order!!!
 
You must log in or register to reply here.

Similar threads

danieyella
aquamaxx media reactor
Replies
0
Views
634
danieyella
danieyella
asmodeus
skimmer vs skimmer
2 3
Replies
49
Views
3K
wildman926
wildman926
CasperOe
Cade Classic Reef S-2 1200 build
Replies
9
Views
890
CasperOe
CasperOe
650-IS350
Used AquaMaxx ConeS HOB Protein Skimmer
Replies
4
Views
545
650-IS350
650-IS350
BeanMachine
FS- AquaMaxx CO-5 Protein Skimmer- 300 to 600 gallons
Replies
5
Views
726
five.five-six
five.five-six
Back
Top